Difference between revisions of "Template:Sub2 with Sub1"
(Created page with "You can use a Sub1 and Sub2 together. The connection will be L1 Pro32 to Sub2 to Sub1 * Connect the L1 Pro32 to the Sub2 (use the SubMatch cable) * On the Sub2 set the Line Ou...") |
m |
||
| Line 6: | Line 6: | ||
* Polarity: Plus on both | * Polarity: Plus on both | ||
| − | For more information start at 1:23 in the video below. | + | For more information start at 1:23 in the video below.<br> |
<html> | <html> | ||
<iframe width="560" height="315" src="https://www.youtube.com/embed/kQ4Pon0DLcs" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html> | <iframe width="560" height="315" src="https://www.youtube.com/embed/kQ4Pon0DLcs" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html> | ||
Revision as of 11:50, 27 May 2021
You can use a Sub1 and Sub2 together. The connection will be L1 Pro32 to Sub2 to Sub1
- Connect the L1 Pro32 to the Sub2 (use the SubMatch cable)
- On the Sub2 set the Line Out EQ to HPF (High Pass Filter)
- Connect the Sub2 Line Out to the Sub1 (optional: use a SubMatch cable to the Sub1)
- Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs
- Polarity: Plus on both
For more information start at 1:23 in the video below.