Difference between revisions of "Mixer to L1 Pro"
m |
m |
||
| Line 1: | Line 1: | ||
To connect a mixer to an L1 Pro | To connect a mixer to an L1 Pro | ||
| − | ;For best results, connect the output(s) of a mixer to the line-level inputs of the L1 Pro. | + | ;For best results, connect the output(s) of a mixer to the line-level inputs of the L1 Pro. |
| + | Most mixers have line-level outputs. The L1 Pro line-level inputs are the 1/4-inch (6.3 mm) Tip-Ring-Sleeve jacks on channels 1, 2, 3. | ||
| − | + | The L1 Pro line-level inputs are the 1/4-inch (6.3 mm) Tip-Ring-Sleeve jacks on channels 1, 2, 3. | |
| − | |||
| − | |||
| + | [[File:L1 Pro8-16 Line Level Inputs.jpg|400px]] | ||
;Don't connect Line-Level Inputs to the XLR Inputs (Inputs 1 and 2) on the L1 Pro. | ;Don't connect Line-Level Inputs to the XLR Inputs (Inputs 1 and 2) on the L1 Pro. | ||
| Line 12: | Line 12: | ||
The nomenclature of "line" is from "telephone line." When the telephone network was being developed in the early 20th century, the nominal level of a telephone signal as it travelled along telephone cables was around 1 volt. So, 1 volt was a "line level" signal. <ref> [https://service.shure.com/s/article/mic-level-and-line-level-what-do-they-mean? Mic Level and Line Level and What Do They Mean?]</ref> | The nomenclature of "line" is from "telephone line." When the telephone network was being developed in the early 20th century, the nominal level of a telephone signal as it travelled along telephone cables was around 1 volt. So, 1 volt was a "line level" signal. <ref> [https://service.shure.com/s/article/mic-level-and-line-level-what-do-they-mean? Mic Level and Line Level and What Do They Mean?]</ref> | ||
| + | |||
| + | === Mixer Outputs === | ||
| + | If the mixer has 1/4-inch (6.3 mm) Tip-Ring-Sleeve outputs, use 1/4-inch (6.3 mm) Tip-Ring-Sleeve cables to connect to the L1 Pro line-level inputs. | ||
| + | |||
| + | If the mixer has XLR outputs, use XLR Female to 1/4-inch (6.3 mm) Tip-Ring-Sleeve cables to connect to the L1 Pro line-level inputs. | ||
| + | |||
| + | === Mixer to Single L1 Pro === | ||
| + | If you are connecting microphones or instruments to your L1 Pro, and you want to add a mixer to your system, you will want to connect the mixer to L1 Pro input 3 using the 1/4-inch (6.3 mm) Tip-Ring-Sleeve jack. | ||
| + | |||
| + | You will want to get a mono output from the mixer to connect to the single input jack on input 3. For tips on how to do that see: [[Stereo Mixer to Mono L1]] | ||
| + | |||
| + | === Mixer to Two L1 Pro === | ||
| + | Connect the mixer Left Output to one L1 Pro input 3 using the 1/4-inch (6.3 mm) Tip-Ring-Sleeve jack. | ||
| + | |||
| + | Connect the mixer Right Output to the other L1 Pro input 3 using the 1/4-inch (6.3 mm) Tip-Ring-Sleeve jack. | ||
| + | |||
== L1 Pro8 and L1 Pro16 == | == L1 Pro8 and L1 Pro16 == | ||
Revision as of 22:10, 8 April 2022
To connect a mixer to an L1 Pro
- For best results, connect the output(s) of a mixer to the line-level inputs of the L1 Pro.
Most mixers have line-level outputs. The L1 Pro line-level inputs are the 1/4-inch (6.3 mm) Tip-Ring-Sleeve jacks on channels 1, 2, 3.
The L1 Pro line-level inputs are the 1/4-inch (6.3 mm) Tip-Ring-Sleeve jacks on channels 1, 2, 3.
- Don't connect Line-Level Inputs to the XLR Inputs (Inputs 1 and 2) on the L1 Pro.
- Connecting a line-level source (such as mixer output) to a mic-level input will cause the sound to be loud and distorted because the line signal is much stronger than what the mic input will accept. Inputs and outputs on many mixers are switchable for either mic or line level operation.
The nomenclature of "line" is from "telephone line." When the telephone network was being developed in the early 20th century, the nominal level of a telephone signal as it travelled along telephone cables was around 1 volt. So, 1 volt was a "line level" signal. [1]
Contents
Mixer Outputs
If the mixer has 1/4-inch (6.3 mm) Tip-Ring-Sleeve outputs, use 1/4-inch (6.3 mm) Tip-Ring-Sleeve cables to connect to the L1 Pro line-level inputs.
If the mixer has XLR outputs, use XLR Female to 1/4-inch (6.3 mm) Tip-Ring-Sleeve cables to connect to the L1 Pro line-level inputs.
Mixer to Single L1 Pro
If you are connecting microphones or instruments to your L1 Pro, and you want to add a mixer to your system, you will want to connect the mixer to L1 Pro input 3 using the 1/4-inch (6.3 mm) Tip-Ring-Sleeve jack.
You will want to get a mono output from the mixer to connect to the single input jack on input 3. For tips on how to do that see: Stereo Mixer to Mono L1
Mixer to Two L1 Pro
Connect the mixer Left Output to one L1 Pro input 3 using the 1/4-inch (6.3 mm) Tip-Ring-Sleeve jack.
Connect the mixer Right Output to the other L1 Pro input 3 using the 1/4-inch (6.3 mm) Tip-Ring-Sleeve jack.
L1 Pro8 and L1 Pro16
L1 Pro32
