Difference between revisions of "Template:Sub2 with Sub1"
m |
m |
||
| Line 1: | Line 1: | ||
You can use a Sub1 and Sub2 together. The connection will be L1 Pro32 to Sub2 to Sub1 | You can use a Sub1 and Sub2 together. The connection will be L1 Pro32 to Sub2 to Sub1 | ||
| + | |||
| + | There are two options. Either is fine. Choose the one you prefer. | ||
| + | |||
| + | ;Option 1: Same EQ to both Sub1 and Sub2 (37 Hz to 200 Hz) | ||
| + | * Connect the L1 Pro32 to the Sub2 (use the supplied SubMatch cable) | ||
| + | * Connect the Sub2 to the Sub1 use a SubMatch cable (purchased separately) OR | ||
| + | ** Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable. | ||
| + | ** On the Sub2 set the Line Out EQ to Full (Full Range) | ||
| + | * Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs | ||
| + | * Polarity: Plus on both | ||
| + | |||
| + | ; Option 2: 37 Hz to 100 Hz to Sub2, 100 Hz to 200 Hz to Sub1 | ||
* Connect the L1 Pro32 to the Sub2 (use the SubMatch cable) | * Connect the L1 Pro32 to the Sub2 (use the SubMatch cable) | ||
* On the Sub2 set the Line Out EQ to HPF (High Pass Filter) | * On the Sub2 set the Line Out EQ to HPF (High Pass Filter) | ||
Revision as of 01:57, 2 November 2024
You can use a Sub1 and Sub2 together. The connection will be L1 Pro32 to Sub2 to Sub1
There are two options. Either is fine. Choose the one you prefer.
- Option 1
- Same EQ to both Sub1 and Sub2 (37 Hz to 200 Hz)
- Connect the L1 Pro32 to the Sub2 (use the supplied SubMatch cable)
- Connect the Sub2 to the Sub1 use a SubMatch cable (purchased separately) OR
- Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.
- On the Sub2 set the Line Out EQ to Full (Full Range)
- Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs
- Polarity: Plus on both
- Option 2
- 37 Hz to 100 Hz to Sub2, 100 Hz to 200 Hz to Sub1
- Connect the L1 Pro32 to the Sub2 (use the SubMatch cable)
- On the Sub2 set the Line Out EQ to HPF (High Pass Filter)
- Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.
- Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs
- Polarity: Plus on both