B1 Bass Module / Positioning

cheap diazepam cheap xenical nokia ringtones qwest ringtones zanaflex online diazepam online verizon ringtones free motorola ringtones order lortab prozac online ericsson ringtones but ortho cheap cyclobenzaprine cheap celexa free ringtones phentermine free cool ringtones cheap prozac free qwest ringtones cialis online sprint ringtones nexium online real ringtones sagem ringtones tracfone ringtones free nokia ringtones free punk ringtones mp3 ringtones sony ringtones ativan online but hgh free midi ringtones alltel ringtones cheap flexeril sony ericsson ringtones motorola ringtones vicodin online free tracfone ringtones buy soma levitra online free motorola ringtones cheap didrex cheap sildenafil pharmacy online online zoloft online hydrocodone online free sony ringtones cingular ringtones viagra buy paxil ambien online buy lortab order hydrocodone vigrx online cheap ativan hgh online sildenafil online buy viagra ortho online nextel ringtones lisinopril free funny ringtones free sony ericsson ringtones buy vicodin hydrocodone order ativan mono ringtones clonazepam levitra free sprint ringtones cialis online sony ringtones cheap levitra zanaflex online phentermine celexa online ultracet online wwe ringtones free sharp ringtones buy norco soma online cheap ultracet free cingular ringtones cheap adipex cheap xenical cheap albuterol cheap tenuate cheap ortho free music ringtones sagem ringtones cheap lisinopril meridia online cheap propecia cheap vigrx cheap diethylpropion cheap albuterol mp3 ringtones meridia online free ringtones cheap ultram soma online cheap lortab cheap sildenafil free nextel ringtones cheap lorazepam free funny ringtones diethylpropion online free ringtones funny ringtones cingular ringtones cheap soma nokia ringtones clonazepam online zyban online clomid online buy prozac online valium order lisinopril meridia online buy tramadol sharp ringtones free midi ringtones flexeril online real ringtones celexa online zoloft online free nextel ringtones ericsson ringtones free music ringtones mtv ringtones order ultram buy valium viagra online lorazepam online cheap cialis cheap phentermine buy nexium samsung ringtones cheap norco meridia online sprint ringtones buy rivotril order carisoprodol carisoprodol online cyclobenzaprine online free qwest ringtones free qwest ringtones cheap fioricet verizon ringtones punk ringtones cheap hoodia pharmacy online online tracfone ringtones tramadol cheap rivotril tramadol online didrex online cheap fioricet music ringtones cheap albuterol free nokia ringtones buy viagra buy alprazolam buy xenical pharmacy online online free funny ringtones order zanaflex free ericsson ringtones cyclobenzaprine online adipex online cheap xanax free alltel ringtones free qwest ringtones ultram online sonyericsson ringtones free samsung ringtones cheap lortab free mono ringtones free samsung ringtones zyban online cheap celexa free funny ringtones wwe ringtones cheap rivotril but clomid buy fioricet buy hgh cheap lipitor cheap hoodia clonazepam online cool ringtones tenuate online cheap vicodin real ringtones free sonyericsson ringtones buy hoodia buy tramadol nextel ringtones cheap alprazolam ambien online

Chris-at-Bose wrote this article and encourages your improvements. Edits for formatting and subtitles done by ST 23:17, 23 November 2006 (GMT-7)

In response to: "where and how is the best way to place the B1; single, double, and quad"

It Depends

I'm planning to expand the wiki article Bass Outdoors to try to be as comprehensive about indoor and outdoor bass placement issues as I can be. Until I publish that, the short but annoying answer is of course, "it depends" and the slightly longer, but still unsatisfying answer is, "results will vary from case to case in ways that even the best acousticians can't anticipate." But you'll often find recommendations on the web or even in technical journals by folks who have only considered a subset of the factors that contribute. The authors may not know about the other factors or, more likely, they may be hoping that those other factors can be ignored. The temptation to extrapolate beyond the part that one grasps is almost irresistible. Hope springs eternal. One wants to give a satisfying answer, even when it is out of reach.

This is not as hopeless as it sounds, because there is an important distinction between "what is best?", which we cannot answer, and "what do you recommend that I do?" which we should and can answer. We can also say some things about "what should I NOT do?" Here I will give you a random smattering of such recommendations and hope that they will suffice until I can give a fully organized wiki entry. It's a pretty long post, but I hope it will address most of the questions that have arisen. (It takes more time to make a shorter post. Smile ) If not, ask more questions and that will help me make the wiki entry more complete. Chris

Orientation, aiming and obstruction

Sound comes through the B1 grille only and then spreads out the same amount in all directions from that surface. So box orientation doesn't matter to the B1 sound. Sonically the B1 can rest on any one of its four sides and nothing will change. (Of course, for stacking, you want the "wide side down" in order to engage the nubs on the next B1.) Once you pick a side to rest it on, you can aim the B1 in any direction you want, forward, sideways, even firing backward toward a rear wall. If you hear a change, it is because you've moved the grille relative to other B1s or relative to boundaries. Don't shove the grille into a wall or into a big obstacle, because then the sound can't get out; leave at least 6 inches (15 cm) of space in front of the grille. The side of the box itself can be right against a wall, so long as the grille is not obstructed. We often start out placing our B1s on the floor, sideways against the rear wall, so that the first reflections from the floor and rear wall will not change the tonal balance in the bass. (Room modes will change the tonal balance anyway, but at least we eliminate one source of variability this way.)

Arranging groups of B1s that play the same signal

When multiple sources playing the same signal are spaced apart, they make an "array" which means that the tonal balance they radiate can be different in different directions. If you understand array theory, you can make this work for you, but in our case, it is safest to keep the spacings as small as we can, so that the array radiates the same in all directions. When we keep the spacing tight, multiple B1s will behave just like single B1s, only louder. What matters here are the spacings of the grilles, not the cabinets, because the grilles are where the sound comes from. The more specific suggestions that follow below rely partly on my own understanding of the theory and partly on consultation with Hilmar, who has both theory and a lot of experience to guide him.

Two B1s

For two B1s, we prefer to stack them on their wide sides, mostly because this takes the minimum floor space. But you can place them side by side or even face to face, leaving 12 inches (30 cm) between grilles (because this is 6 inches (15 cm) in front of each B1). Sonically, it doesn't matter which wide side is up and the two don't have to have the same side up. Sonically you can even have one B1 on its wide side and one on its handle side, although that looks funny. In fact, for two B1s, "looking good" places more restrictions on what you do than "sounding good." I've seen two B1s placed either side of an L1 on the PS1, and that should work fine acoustically. In any arrangement where the grilles fit completely within a 30 inch (75 cm) diameter sphere, your two B1s will act like a single one, only louder. Note that spacing two B1s on the floor with the PS1 between them does not meet this criterion. That arrangement would reduce the mid-bass that radiates to the left and right sides.

Four B1s

For 4 B1s, we are most likely to stack all 4 on their wide sides, but sometimes we make two stacks of two, side by side. The stack of four takes up the least floor space, but it radiates a little less mid-bass upwards, which has not been a problem and might be beneficial. We don't lay all four in a line on the floor on their wide sides, since we expect this to weaken the midbass that travels left and right toward other band members or audience at the sides. You could probably lay all four in a line if you rest them on their handle sides, so that they make a short line. If you use the 2x2, keep the two stacks adjacent to avoid possibly weakening the mid-bass to the sides.

Locating the Group of B1s

Where to locate the group: If the group of B1s is far from its L1, the lows will come from one place and the highs from another and this is harder for everyone to hear clearly. More than about 5 feet (1.3 m) of separation is probably beginning to compromise your spatial quality. It's best if you can keep the B1s adjacent to or within a foot (30 cm) of the PS1. Since our preferred arrangements are stacks of 2 or 4 B1s, we also like to aim those stacks sideways and place them against the rear wall if we can, because this minimizes unwanted array effects with the first reflections. But we don't hesitate to aim the stacks forward when the best appearance is more important. In this case, we keep the B1s as close to the back wall as the connectors allow, but being careful not to stress the cables by bending them too sharply against the wall. Although we prefer to keep the B1s as close to the rear wall as we can, there are times when this is just not an option. In such cases, we try to get 7 feet (2.1 m) or more from a rear wall as a second choice because, in the 2-7 foot (.3-2.1 m) range, the reflection from the rear wall tends to reduce some of the bass frequency range in the audience (an interference effect). Sometimes we have no choice but to place B1s in that 2-7 foot (.3-2.1 m) range and we just live with the minor reduction in bass, perhaps compensating with a bass tone control boost.

Other variations: It's okay to raise the B1s on short risers if you like, but I don't know of any reason why this would always sound better or worse, just different. Floors and walls are not perfect reflectors of bass, but I have no different recommendations to make due to this source of variation.

It Depends

Although the above suggestions describe our default arrangements, they don't always yield good-sounding results. The factor that we can't really control or understand easily is the room. Rooms often cause very uneven distribution of bass and there is no universal method of cure. Sometimes a different speaker placement seems to help, but what helps for one listener usually makes it worse elsewhere. It's easy to fool yourself and it's easy to fuss endlessly without finding a good solution. We try not to fall into that trap. If one or two alternatives don't cure the problem, we give up and move on.

There are only a few techniques that we think are likely to help. First, if there is too much bass, we might try to fix that with a tone control reduction before moving anything, since, if it works, we will have higher maximum bass output available to us (because the bass amp is working less hard to give the right amount of bass). If a bass control adjustment doesn't straighten out the problem we hear, we might move the stack closer to or farther from the nearest corner. Closer sometimes increases bass while farther sometimes reduces it. (That's the simplified theory, anyway.) But proceed with care: the change the musicians hear will probably be different from the change in the audience. Make sure you know who you are trying to improve the sound for. The last thing we might try is a different arrangement, say switching from a stack of 4 to 2x2. If these few alternatives don't give a clear improvement (and they usually don't), we think it's time to shrug our shoulders and get on with the show.

Who Wins?

Ultimately, we have to be willing to accept that often the room will "win" and we won't get the ideal bass response. This will be true for any bass system, not just specifically for the B1. There is no point in worrying about this--we do what little we can to avoid the worst and then concentrate on giving a good performance. If we do that, the L1 will make sure people enjoy the sound, even when the bass isn't all that we'd like it to be.