Difference between revisions of "T1 ToneMatch® Audio Engine / Connections to Model II"
m (Ethercon and ToneMatch® cable links) |
m |
||
Line 3: | Line 3: | ||
=== ToneMatch™ Connection === | === ToneMatch™ Connection === | ||
− | The ToneMatch® connection is specifically designed for a {{T1}}. The [[ToneMatch® cable]] is supplied with the {{T1}} and uses a male [[Ethercon]] connector at both ends. | + | The ToneMatch® connection is specifically designed for a {{T1}}. The [[ToneMatch® Cable|ToneMatch® cable]] is supplied with the {{T1}} and uses a male [[Ethercon]] connector at both ends. |
=== Analog Connection === | === Analog Connection === |
Revision as of 19:47, 6 December 2008
The L1 Model II can accept two inputs.
ToneMatch™ Connection
The ToneMatch® connection is specifically designed for a T1 ToneMatch Audio Engine. The ToneMatch® cable is supplied with the T1 ToneMatch Audio Engine and uses a male Ethercon connector at both ends.
Analog Connection
The Analog connection is a ¼ inch phone jack. You can use this for a the second T1® using the T1® Analog Master output (¼ inch phone jack).
This connection is made with a standard ¼ inch jack instrument cable. This can be Tip-Sleeve or Tip-Ring-Sleeve connectors.
Note: A T1® connected to the the Analog input will require the optional T1 ToneMatch® Audio Engine power supply.