T4S Connection to L1 Model I

Classic

T4S

You can connect the T4S ToneMatch mixer to the L1 Classic or L1 Model I, just as you would a T1®. You'll need a ToneMatch Power Supply

There's a slight difference because there are two 1/4 inch (6mm) output jacks on the T4S for Left and Right Outputs.

You've got two ways to handle this:

1. Pan all your inputs to one side (e.g. Right) and connect the T4S Right output to the L1® Classic Channel 3 (try setting the level to about 4)
   
   
   

OR

1. Leave your inputs panned to center (the default setting), and connect
   • T4S Left output to the L1® Classic Channel 3
     try setting the level to about 4
   • T4S Right output to the L1® Classic Channel 4
     try setting the level to about 4

When using a T1® or T4S with the L1® Classic, you don't need to use the R1 Remote.

---