T1 ToneMatch® Audio Engine / Microphone Stand Bracket
{{#Click:http://www.bose.com/controller?url=/shop_online/speakers/portable_amplification_systems/accessories/l1_tonematch_micstandbracket_acc.jsp%7CL1 tonematch micstandbracket acc bl lg.jpg|375px|T1® microphone stand bracket}}
There is an optional microphone stand bracket for the T1 ToneMatch Audio Engine.
This is actually two pieces.
- The microphone stand bracket that attaches to a microphone stand and a
- The mounting bar that connects to that.
The T1 ToneMatch Audio Engine sits on that mounting bar.
Documentation
Here is an excerpt from the Template:T1™ Manual - page 10.
Owner Comments and Alternatives
- T1 mic stand adapter, thoughts and questions - Owners talking about the microphone stand bracket.
- Sight Lines and the T1® - Owners talking about placement of the T1® on the stage using the Microphone Stand Bracket.
Hints
- The bracket that sits parallel to the floor has a bevel on the top. The bevel should run down, facing you. If the bevel runs down away from you, the bracket is upside down and the T1 ToneMatch® Audio Engine will not sit properly on top of it.
- Secure the ToneMatch® cable to your microphone stand, above the T1 ToneMatch® Audio Engine. This will help keep it secure on the bracket and help to keep it from hitting the floor if it becomes dislodged from the bracket.
- If you use a microphone stand with a wider than usual diameter, try removing the inserts in the clamp. — Source: dberch on the Forum
Where to get it
See the second item on the Bose® Accessories Page