T1® and Model 1S with Effects Unit

From Bose Portable PA Encyclopedia
Revision as of 13:25, 10 May 2014 by ST (talk | contribs) (New page: {{T1 with Effect to L1 | L1 Unit = Model 1S | Image 1 = T1 Effect Unit Model 1S-1.png | Image 2 = T1 Effect Unit Model 1S-2.png }})
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Using an Effects Unit inline with your T1® and Model 1S

If you want to connect an effects unit between your T1 ToneMatch Audio Engine and Model 1S you will need a T1 ToneMatch® Audio Engine Power Supply because you will not be using the ToneMatch cable that would normally supply the power to the T1 ToneMatch Audio Engine.

T1 Effect Unit Model 1S-1.png

T1 Effect Unit Model 1S-2.png

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=T1®_and_Model_1S_with_Effects_Unit&oldid=16477"