Template:S1 Pro System Updates

From Bose Portable PA Encyclopedia
Revision as of 10:48, 20 June 2018 by ST (talk | contribs) (disable Avast)
Jump to: navigation, search

S1 Pro  This information is applicable to the S1 Pro system

Please ensure that your S1 Pro System is fully charged and connected to AC power when you do the firmware update.

Bose Updater PC/MAC

S1 Pro System updates can be obtained by using your PC or MAC computer. Navigate to the Bose Updater. The update requires a USB cable.

USB A to Micro USB cable

If you purchased your S1 Pro System prior to May 10, 2018 (North America/Europe) or July 2, 2018 (other regions), you must update your firmware using the Bose Updater. Then you can connect to the Bose Connect App.

Trouble Shooting

We have had one report where the Bose Updater tool would not install correctly from the website. The customer had to temporarily disable Avast Antivirus Software to allow the software to run.


Bose Connect App

The Bose Connect App adds enhancements to streaming Bluetooth to the S1 Pro Channel 3.

Firmware Release Notes
Firmware versionDateNotes
7.1.0 June 3, 2018

New features of v7.0.10 and Bose Connect App Version 6.1.0

  • Party mode TWS - true wireless stereo
  • Firmware updates wirelessly - Over the air using Bose Connect App
  • Bose Connect App
    • Battery charge level display
    • Volume Control
    • Device ID - Serial Number, date code, firmware version.
6.x.x January 2018 Factory installed


If you have difficulty updating your firmware, please contact Bose Support.


Retrieved from "https://toonz.ca/bose/wiki/index.php?title=Template:S1_Pro_System_Updates&oldid=19504"