Template:Balanced TRS from T1 to T8S

From Bose Portable PA Encyclopedia
Revision as of 11:10, 14 July 2018 by ST (talk | contribs) (Created page with "{{Balanced TRS |Input= {{T1}} |Output= {{T8S}} |discussion page = link to forum discussion (optional) e.g. discussion in the Bose Message Board }}")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


The output from the T1 ToneMatch Audio Engine is a balanced mono 1/4 inch (6.35 mm) Tip-Ring-Sleeve and the input on the T8S ToneMatch mixer is a balanced mono 1/4 inch (6.35 mm) Tip-Ring-Sleeve so use a cable like this.

1/4" Male TRS to 1/4" Male TRS Cable.

1/4" TRS Balanced Patch Cable (audiopile.net)

Retrieved from "https://toonz.ca/bose/wiki/index.php?title=Template:Balanced_TRS_from_T1_to_T8S&oldid=19677"