L1 Compact to S1 Pro
Revision as of 23:37, 6 August 2019 by ST (talk | contribs) (Created page with "{{Compact icon}}{{Model II icon}} <noinclude>This page describes ''''how'''' to make the connections. Please also see: Stereo / Mono / Distributed Systems to read when and...")
This page describes 'how' to make the connections. Please also see: Stereo / Mono / Distributed Systems to read when and 'why' you would do this.
Use this when you want the same output from a L1 Compact and an S1 Pro System, typically to provide additional coverage in another area.
- For best results running a Compacts and an S1 Pro System with the same source, place the two systems so there is no overlap in the coverage areas.
Note: The volume settings on the Compact will raise and lower the output to the S1 Pro System. Set the volumes on the Compact first and then bring up the level on the S1 Pro System to set the relative volumes between the two systems.
