Template:ToneMatch Mixer Backing Tracks

Usage

{{ToneMatch Mixer Backing Tracks

|SourceDevice= an iPad, iPod, Tablet, Computer

|DeviceLink= T4S or T8S

|Device= name of the device eg T4S ToneMatch mixer T8S ToneMatch mixer

|ImageAuxIn= image for Aux Inputs eg [[File:Backtracks_to_T4S_56.png|600px]]

|ImageLastChannelsIn= image for Aux Inputs eg [[File:Backtracks to T4S 34.png|600px]]

|discussion page = link to forum discussion (optional) e.g. discussion in the Bose Message Board

}} Template will render as it appears below this line.

---

Analog Connections

Aux Inputs

Connect to the Aux Inputs to leave the combo jack inputs available. The Aux inputs are routed directly to the Main outputs. You can set Pan and Level using the Rotary Selector PAN/AUX settings

Combo Inputs

If you need to use Presets, Effects, or the physical volume controls, connect to the last two channels that have combo inputs.

Stereo to Left/Right Adapter

Plug this into your source device: an iPad, iPod, Tablet, Computer (headphone or line out jack). Connect:

• 1/8 inch (3 mm) Tip-Ring-Sleeve jack on the source device and
• Colored ends to the T4S

Source: Hosa CMP159

T1 ToneMatch® Audio Engine / Gain Staging / Prerecorded music on Channel 4/5

iPad or iPod

If your Apple device does not have a headphone output, consider using the Apple Lightning to 3.5mm Headphone Adapter.

If you connect your iPad or iPhone to a T1 ToneMatch^® Audio Engine or T4S ToneMatch mixer channels 1, 2, 3 (or T8S ToneMatch mixer channels 1, 2, 3, 4, 5, 6, 7, 8) using a cable like this

You will hear only the LEFT side of the stereo signal. To hear both LEFT and RIGHT sides of the stereo signal, you must change the signal to MONO.

Set your iPad or iPhone to Mono

Launch the Settings app on your iPad or iPhone.

1. Tap General.
2. Tap Accessibility.
3. In the Hearing section, turn Mono Audio On

Now both sides of the stereo output will have a mono signal (both Left and Right channels combined).

You can use a cable like this.

You can connect the stereo output to a mono unbalanced input like T1 ToneMatch Audio Engine channels 1,2,3.

This does not apply to T1 ToneMatch^® Audio Engine channel 4/5. The channel 4/5 inputs are balanced mono and not compatible with a stereo signal that has been mixed down to mono from the iPad or iPhone

You can use just one input on the source device: an iPad, iPod, Tablet, Computer if you can set the source device output to mono. Typically, you can do this under Accessibility options.

Set your iPad or iPhone to Mono

Launch the Settings app on your iPad or iPhone.

1. Tap General.
2. Tap Accessibility.
3. In the Hearing section, turn Mono Audio On

Then use a cable like this but connect only one end (red or grey) to one of the combo jacks on the ToneMatch mixer. This will give you both sides of the stereo track (combined to mono).

Source: Hosa CMP159

USB B Connection from Computer

Documentation Update

USB B from PC and USB A can be directed to:

• None
• Aux In
• Channel 3 or 4 (T4S) ⇐ New
• Channel 7 or 8 (T4S) ⇐ New
• Master

Settings for USB B from PC are also applied to USB A Playback.

USB B from PC to Aux

If you have questions or comments on this video please see this discussion in the Bose Pro Portable PA Community

USB B from PC to Channels

If you have questions or comments on this video please see this discussion in the Bose Pro Portable PA Community

Note

Routing settings for USB from PC are also applied to USB A playback. See USB A Playback.

T1 ToneMatch Audio Engine

Please see: T1 ToneMatch® Audio Engine / USB

---