Amazon Echo to S1 Pro
Introduction
The S1 Pro system
- [[Amazon Echo to S1 Pro#Put your S1 Pro system in Pairing Mode]]
- Amazon Echo to S1 Pro#Connect your Echo device
To connect your Amazon Alex device to your S1 Pro
Put your S1 Pro system in Pairing Mode
Press and hold the Bluetooth button for about 3 seconds until the Bluetooth indicator begins flashing white. The Bluetooth button is located in the Input 3 section on the system's control panel
Connect Your Echo Devices
You can stream audio from an Echo device through a Bluetooth speaker.
Before you begin
- Set your Echo and Bluetooth speaker at least three ft (one m) apart.
- For best results, choose a Bluetooth speaker certified for use with Echo devices. To learn more, go to Supported Bluetooth Profiles for Echo Devices.
- Turn on your Bluetooth speaker and turn up the volume.
- Disconnect other Bluetooth devices from your Echo. An Echo can only connect to one Bluetooth device at a time.
To connect a Bluetooth speaker to your Echo
- Turn on pairing mode on your S1 Pro System.
- Press and hold the Bluetooth button for about 3 seconds until the Bluetooth indicator begins flashing white. The Bluetooth button is located in the Input 3 section on the system's control panel
- In the Alexa app, select the Devices icon.
- Choose your device.
- Select Bluetooth Devices.
- Select Pair a New Device.
- When a list of available devices appears, select your Bluetooth speaker and follow the instructions on the screen.
- When the device pairs successfully, the Bluetooth button will turn solid white.
Tip: To connect to a previously paired device, say, "Connect." Your Echo connects to the device that was last connected.
Adapted from Connect Your Echo Device to Bluetooth Speakers]