Template:ToneMatch Power Supply

ToneMatch® Audio Engine power supply. This is the power supply for the ToneMatch Mixer^[1]. You will need this to power your ToneMatch Mixer^[1] when running with an L1 Compact, S1 Pro System, L1 Classic, L1 Model I, or or non-Bose equipment. You will need a one of these if you have two ToneMatch Mixer^[1]s running into a single L1^® Model II or L1^® Model 1S. — details below the picture.

Click image above for purchasing details.

If you connect your T1 ToneMatch^® Audio Engine to a L1 Model II or L1 Model 1S then the T1 ToneMatch^® Audio Engine draws its power through the ToneMatch® cable.

If you connect your T1 ToneMatch^® Audio Engine to an an L1 Classic, L1 Model I or L1 Compact or non-Bose equipment then you will need the T1 ToneMatch® Audio Engine power supply

If you are attaching two T1 ToneMatch^® Audio Engines to a single L1^® Model II then you will need this power supply to support the second T1® - the one connected to the Power Stand Analog Input.

See: Connecting Two T1®s to a Model II for details.

Close up of the connector that goes to the ToneMatch Mixer^[1], just in case you damage the cable and have to replace the connector.

Note: The picture is taken with the flat side facing the camera. The release clip is on the other side.