L1 Pro Daisy Chain

To connect to L1 Pro systems (daisy chain) to use the second system as an extension of the first

1. Use an XLR female to 1/4 inch (6.3 mm) Tip-Ring-Sleeve to connect the L1 Pro Line Out to a second L1 Pro (any model) input three
2. Set the volume on the second L1 Pro to suit the application.

Note

The Line Out is post-fader. That is, it is the combined signal of all inputs and ToneMatch processing, EQ and Reverb. That includes inputs, 1, 2, 3, Bluetooth, and ToneMatch Port (used for T4S/T8S ToneMatch® Mixers)

This applies to any two L1 Pro systems (L1 Pro8, L1 Pro16, L1 Pro32).

---