Bose L1 Model II Compared to L1 Pro32

Feature	Bose L1 Model II with B2	Bose L1 Pro32
Horizontal dispersion	180 degrees	180 degrees
Vertical dispersion	0 degrees (straight)	0 degrees (straight)
Output	115 dB / 121 dB peak	With Sub1: 117 dB / 123 dB peak With Sub2: 122 dB / 128 dB peak
Audience	up to 500	not specified
Speaker Array	Twenty four 2.25" (57 mm) articulated array	Thirty two 2.00" (51 mm) articulated cricket drivers
Woofer	Two 10" low frequency drivers in the B2	Sub1:One 7" x 13" neodymium racetrack transducer Sub2:One 10"x 18" neodymium racetrack transducer
Low Frequency	40 Hz - 3dB	With Sub1:37 Hz - 3dB With Sub2:42 Hz - 3dB
Crossover	200 Hz	200 Hz
Power to speakers	Biamped  250 Watts RMS mid-high Cylindrical Radiators  250 Watts RMS B2  500 Watts total	Biamped Power Stand 480 Watts RMS mid-high array Sub1 480 Watts RMS Sub2 1000 Wattes RMS 960/1480 Watts total
Weight	Total system weight  49.67 kg (110 lb) Power Stand: 10.7 kg (32.0 lb) Cylindrical Radiators (pair): 15.3 kg (33.7 lb) B2 Bass Module: 23.67 kg (52.2 lb)	Total system weight with Sub1 29.1 kg (64.1 lb) Sub2 36.4 kg (80.3 lb) Power Stand: 5.9 kg (13.0 lb) Mid-High arrays (2) 7.1 kg (15.6 lb) Sub1 16.1 kg (35.5 lb) Sub2 23.4 kg (51.7 lb)
Dimensions (H x W x D)	L1 Model II Power Stand 213.4 x 66.0 x 66.0 cm (84.2 x 26.0 x 26.0 in) B2 Bass Module 59.4 x 33.8 x 48 cm (23.4 x 13.31 x 18.9 in) Footprint (floor space required) L1 Model II with B2 (W x D) 71.0 x 66.0 cm (28.0 x 26.0 in)	L1 Pro32 213.5 × 34.5 × 55 cm (84.1 × 13.6 × 21.7 in) Sub1 53.0 × 25.0 × 53.0 cm (20.9 × 9.8 × 20.9 in) Sub2 69.0 × 30.5 × 55.0 cm (27.2 × 12.0 × 21.7 in) Footprint (floor space required) L1 Pro32 with Sub1 (W x D) 59.4 x 55.1 cm (23.4 x 21.7 in) L1 Pro32 with Sub2 (W x D) 65.0 x 55.1 cm (25.6 x 21.7 in)
Everything below this bar is the same for both
ToneMatch® Presets	No	Channels 1 and 2 Full suite of ToneMatch Presets available in the ToneMatch mixers, built-in. Set using the L1 Mix App.
Battery	No	No
Connections	Input 6 mm (1/4" Tip-Ring or Tip-Ring-Sleeve) balanced / unbalanced ToneMatch Port	Channels 1 and 2 Combo Jacks XLR / 6 mm (1/4" Tip-Ring or Tip-Ring-Sleeve) balanced / unbalanced Channel 3/Aux Input 6 mm (1/4" Tip-Ring or Tip-Ring-Sleeve) balanced / unbalanced 3 mm (1/8" Tip-Ring-Sleeve) accepts stereo or mono input Bluetooth input
Tone Controls	No	Channel 1 * Bass / Treble Channel 2 * None
Line Out	No	XLR balanced
Bluetooth input	No	Yes: Channel 3 Supports Bluetooth 5.x
Reverb	No	Channels 1 and 2 Yes Channel 3 None
ToneMatch Port	Yes full support for T1/T4S T8S not supported	Yes full support for T4S/T8S power only for T1
System EQ	No	Yes Live/Music/Speech/Off
Scenes	No	Yes Store/recall system settings via Bose L1 Mix App
Bose L1 Mix App	No	Yes Wireless control over volume, tone, reverb and system EQ

---