Template:S1 Pro with Sub1 or Sub2

Connections with Sub1 or Sub2 and the S1 Pro system

For best results the signal flow should go from left to right with

1. The signal source (e.g., ToneMatch Mixer output to
2. The Sub1 or Sub2 subwoofer Line Out to
3. The S1 Pro system with channel volume set to 10 o'clock.

Set up this way,

1. The Sub1 or Sub2 handles frequencies from 40 Hz (Sub1) 37 Hz (Sub2) to 150 Hz
2. The S1 Pro system handles frequencies above 150 Hz

The picture shows a stereo setup, but illustrates the principles for mono.

If you use the S1 Pro system as the sound source (e.g., microphone and guitar and backing tracks via Bluetooth)

1. The S1 Pro system will sound the same as without the subwoofer (62 Hz - 17 kHz)
2. The Sub1 or Sub2 will cover from 40 Hz (Sub1) 37 Hz (Sub2) to 150 Hz

---