Kemper Profiler

Kemper Profiler

Kemper Profiler

This article is a collection of snippets of information about the Kemper Profiler. This page is an unofficial repository of useful things I've picked up along the way.

My Kemper Profiler

May 2014 Kemper Profiler (unpowered, white).
This model was known as the Kemper Profiling Amp

May 2016 Kemper Profiler Remote

August 2020 Kemper Stage

My holy grail amp and the first amp I profiled: McIntyre BluesMaker II

• Rig Exchange, search for McIntyre
• Download 🔽 McIntyreRigs.zip

Gig Rig: L1 Pro32 with Sub1. Depending on the size of the gig I may use a one or two L1 Pro32 or L1 Pro16 or L1 Pro8 with a T4S/T8S_ToneMatch®_Mixer

Fun Rig: Stereo — Two EV M-12G (EVM-12L in floor-wedge cabinets) with two PackLite® power amplifier Model A1 (250 Watts RMS, Class D amps)

Experimental: Sennheiser EW IEM G4-TWIN - Double Wireless In-Ear-Monitor-System

Documentation

Documentation

👉 Kemper Manuals and Quick Start guides 📖

👉 Rig Manager Download and Documentation 💽📖

👉 Kemper Tutorials & Demos (videos) 🎬

👉 Before you buy Commercial Rigs and Profiles check out the Rig Manager for Rig Packs and Rig Exchange

👉 Kemper FAQs (Frequently Asked Questions)​

​

Download Main Manual 8.2 English

Specifications

Technical Specifications

Power Consumption

Kemper Profiler Stage

• Approximate draw 12 watts

The Kemper Profiler with Remote

• Approximate draws approximately 17 watts

EQ in Output Section

Frequencies of the Output EQ

Bass Shelf 150 Hz (steep)

Mid Peak 600 Hz

Treble Shelf 2400 Hz

Presence Shelf 10000 Hz

The Tonestack (EQ in the Stack) is different and softer. There is interaction between the controls, so there are no defined frequencies, that can be announced.

Let me say an important word, as assumptions like on this thread keeps me busy since quite a time. There were about four threads in the last too weeks where I had to disagree to assumptions made by measurements Whenever you try to visualize a sonic behavior in means of scope, waveform display or frequency plot, to derive a deeper interpretation, you are very likely to fail. What you see is rarely what you hear. Trust your ears instead! It requires an immense knowledge to make qualified measurements and assumptions to derive better information by measurements and watching the results by your eyes, that you can simply hear with your ears.

In knowledge thereof, I rarely use scopes or analyzers for my development work, as I have failed to often by interpreting what I saw, even though I probably have the background knowledge needed. Instead I use my ears every day.

Source: C Kemper

There are several related discussions that are equally interesting. Here are some examples.

This whole FRFR discussion is something, that I don't understand.

Linear speakers are never fully linear, that's true. But they try to. Modern studio monitors are very linear. I had the chance to participate in a comparison test of different studio monitors. The best of them sounded surprisingly equal, when different brands where compared.

However there is no absolute linearity, since the perceived frequency responce differs with the room we listen, and the angle to the speakers etc.

Is this a problem? Not at all. We all grew up listening to speakers here, there and everywhere, and in the car e.g. We listen to our favorite music by headphones, by kitchen radio, in our studio, by television. Some are better, some are worse. In the same way we have listened to our guitar heros. The speakers that we utilized have an impact to their studio guitar sound, as well as to the rest of the music. Did we bother? Not really. If we didn't like a speaker, it was due to the general perception of the music, not explicitly the guitar sound.

Do you guys make your own music recordings with guitar embedded? You will run into the same situation as every other recording: It will be listened to by a variety of speakers.

Now to the pure guitar sound of the Profiler, which is a studio sound. Still not a different situation. The guitar sound is colored by the speakers in the exact same way a piece of music would be colored with that guitar embedded. Would you ask for a complex EQ for correcting the frequency responce? Maybe yes. But the EQ should be set for the whole music, not just the guitar.

I am aware that many guitarists are not used to the studio sound of a guitar, even though they have listened to studio sounds all their live. Users sometimes state profiles do not sound good through their speakers. Well, that's the sound of a guitar amp in a studio, heard through your speakers. Get used to it! it's reality. Play along some music through the same speakers, and the sound will make sense.

Professional guitarists have got used to the studio sound of amps. They play in studios often, or by Inear monitors on stage. It is probably a similar situation like singers getting used to listen to their own recordings.

EQ presets for different FRFR simply do not make sense. There is no pro guitarist or producer, that has ever asked us for a complex EQ or Highcut or Lowcut or correction curves for linear speakers. They know about the everpresent relativity of frequency responces, that is colouring music in whole as well as guitar sounds in detail.

If you cannot handle linear speakers for your guitar sound, then play the profiler through a guitar speaker. But be aware that you have been listening to guitars by linear speakers for all your life, it's simply that the sound is odd to you when not embedded into music.

Source: C Kemper

---

Profiles

Studio or Merged

Kemper Profiles How to Distinguish a Studio Profile from a Merged Profile

With Bose L1

ToneMatch Mixer

Set everything flat on the ToneMatch mixer and control the guitar sound on the Profiler. If necessary, use the zEQ or ParaEQ to solve acoustic issues at the venue. That is: Use the Profiler to create your guitar sound. If necessary, use the zEQ and ParaEQ on the ToneMatch to deal with the environment. That way, when you move to a different environment, you don't have to make changes to the Profiler.

Connections

Connect the Profiler Main Output to the ToneMatch mixer (since the ToneMatch mixer is the input to the FOH (Front of House)).

• Connect to a 1/4 (6.3) input. Use a 1/4 (6.3 mm) Tip-Sleeve cable.
• XLR connection. That is preferable when you have cable runs in excess of 20 feet (six meters).

Profiler Main Outputs:These are your main stereo outputs. Use these outputs to connect to a mixing desk in a recording studio, or to the front-of-house mixer in a live situation. These outputs deliver the entire Rig: amp, cabinet, and all effects. You have a choice of XLR (balanced) or quarter-inch TS-jacks (unbalanced). The XLR outputs are protected against 48V phantom power fed by a mixing desk. However, you should avoid feeding phantom power into the PROFILER if you want the best audio quality. Like all inputs and outputs, it offers a ground lift to prevent a loop hum. Source: Kemper Main Manual

Settings

In the Profile Output section, page 1, Set Main Output to Master Mono (or Master Stereo if you are running two L1 systems).

On the ToneMatch mixer, on the channel to which you have attached the Profiler

ToneMatch Preset

Category: Electric Guitars

Preset: Flat E. Guitar ZEQ or General Processor [try both]

ZEQ

Lo, Mid, Hi set to 0 (I use this for quick changes to compensate for room acoustics)

ParaEQ

All bypassed

Comp/Gate

Bypassed

Mod

Bypassed

Delay

Bypassed

Reverb

Bypassed

No Mixer

If you are not using a mixer between the Profiler and the Bose system, this section is for you.

L1 Pro

You can connect the Profile Main Output to the L1 Pro Input 3.

L1 Model 1S/L1 Model II

Connect the Profiler Main Output to the Analog Input on the Power Stand. Set the Analog Input Trim so you get a solid green light. If you see solid red, turn down the Trim

L1 Compact

Connect the Profiler Main Output to Channel 2. Set the ToneMatch switch to Line Level (Down).

S1 Pro

Connect the Profiler Main Output to Channel 1 or 2.

Another option is to connect the Profiler headphone output to the S1 Pro Input 3 (the 1/8 inch (3mm) input). Input 3 is stereo.

Quick Tips

Backup/Restore from Profiler Head to Stage

Make sure both devices are running the same version of the operating system.

On the Profiler Head/Powerhead/Rack/Powerrack back up to USB

On the Stage restore from backup.

The two machines should now be identical except for the following items, you will have to check.

1. Global pedal assignments - the Stage has four PEDAL sockets, while the Head has two plus another four with Remote. These assignments don't automatically map to the Stage.
2. Monitor Output Source - by default the Head MONITOR OUT is mono and optionally stereo, while the Stage offers a dedicated stereo MONITOR OUT. Therefore the output source of the MONITOR OUT might require your intervention.

Source: Kemper Community - G-String

Swap Up/Down Buttons

Swap Up/Down buttons on the Kemper Profiler Remote or the Kemper Stage

On the Profiler

• Press the System button
• Navigate to page 12/18 [Remote]
• Press soft button 3 [Button Assignment]
• Press soft button 1 [Switch Up & Down]

On the Stage

• Press the System button
• Navigate to page 4/11 [User Interface 2)
• Press soft button 3 [Button Assignment]
• Press soft button 1 [Switch Up & Down]

---

Wah Settings

• Wah Settings Spreadsheet
  • Discussion Dragonsf

• Kemper Wah Settings
  • Monkey Man

Rig Manager Tips

Synchronize Two Instances of Rig Manager (Windows 10)

How do I transfer my Rig Manager settings from my desktop to my laptop (both running Rig Manager)?

You can use the Backup Rig Manager Content features on your desktop.

1. Transfer the backup file to your laptop,
2. Restore Rig Manager Backup on the laptop. You will find these functions in Tools.

How do I keep two computers running Rig Manager in sync?

There is no automated way to synchronize two instances of Rig Manager. You can do this manually in Windows. You may be able to do something similar on a Mac.

1. Designate one computer as the Source and the other, the Destination.
2. On the Source, navigate to C:\Users\<username>\AppData\Local\Kemper Amps\RigManager
   • Note: Folders for
     • Local Library (contains Rigs)
     • Prf (Contains Performances)
     • Prst (Contains Presets)
3. On a shared drive or USB key, create the same three folders (Local Library, Prf, Prst)
   • • Local Library
     • Prf
     • Prst
4. Copy the contents of the files you want to replicate into the respective folders on the shared drive or USB key
5. On the Destination, navigate to C:\Users\<username>\AppData\Local\Kemper Amps\RigManager
6. Copy the contents of the shared drive or USB key to the respective folders on the destination

---

Performances

Naming in Performances

Performance Name, Slot Name, Rig Name, Amp Name, Cabinet Name, other tags... are all different animals. People can use these for different purposes.

Performance Name could reflect the name of a song.

Slot Name could reflect a musical Scene e.g. "Solo".

Rig Name could reflect a combination of information like "Gilmourish SM57".

Amp Name could be "Hiwatt 100".

These are just examples.

Rig Name is normally a combination of pieces of information about provider of the Rig, amplifier, amp settings, microphone, instrument, purpose of the Rig.... It can be edited when you store a RIG (Store/Rename) or in the Rig Settings under Rig Tags (also Rig Tags in Rig Manager).

As long as Slot Name equals Rig Name, both change, if another Rig gets loaded into a Slot. Slot Name follows Rig Name. As soon as Slot Name and Rig Name deviate, the Slot Name sticks and doesn't follow, if you load another Rig. Slot Name can be changed in Edit/Slot Settings or Rig Manager.

Amplifier Name is one of a whole bunch of amplifier tags, which can be edited in the amplifier module under Amp Tags. The same applies to Cabinet Tags.

Source: Kemper Community

Factory Content: Performances

Here are the Kemper Performances that are factory installed with new Profilers (all models) as of this March 2021. I'm providing them here in case you need to re-install them.

File:Kemper Factory Content Performances.zip

1. 
   Extract the zip file into a folder. There are seven Performances. These are files with the extension .performance.
   
2. Open Rig Manager
3. Arrange your desktop so you can see the contents of the folder and Rig Manager at the same time.
4. 
   
   
   Drag the Performance files (one at a time) to any New Performance
   All Performances
   - My Profiler
   - - Any Performance called New Performance
   Warning: If you drag a Performance on top of an existing Performance, the existing one will be overwritten.
5. Put your Profiler into Performance Mode and enjoy.

Backup/Restore To different Profiler

The OS is not included in backups. Otherwise you could never use backups across software revisions. Just data and settings are included. Backups are always upward compatible. As written in the Main Manual you can share backups between Stage and other models and this worked since day one. You just need to be aware, that the hardware architecture differs in a few areas, which requires a few decisions:

• The Stage has no MIDI THRU.
• Its MONITOR OUT is stereo by design, while it is optionally stereo at other models.
• The Stage supports two effect loops.
• Its PEDAL sockets 1-4 don't match the PEDAL sockets of other models 1+2 plus Remote 3-6.

If you are using these features you might need to take a few decisions and adjust those settings, because these cannot be migrated automatically.

Source: Burkhard

Kemper Powered Kab

Q; I need more volume from the powered Kab

A; Every Profiler and the Kemper Power Kabinet is perfectly matched in level.

In difference to an external power amp, it is impossible to hard-clip the power amp of the Kabinet.

For higher volumes, the analog volume control on the Kabinet should be set to maximum.
Then the volume is solely controlled by the Monitor Volume and the Power Amp Boost.

Source: ckemper

Issues

Profiler Stage Loses Date/Time

If the internal clock of your new PROFILER Stage always looses date and time when the unit is disconnected from the power network, it requires service. Sorry for the bad news and inconvenience, but this can't just be fixed by a software update nor by just exchanging the battery. Our service has a permanent fix. Please open a support ticket here and the situation will be dealt with professionally:

https://www.kemper-amps.com/contact

Just to let you know, the clock issues has not other functional implications. So, it's safe to use the unit for guitar playing.

Source: Burkhard

Factory Reset

From Kemper support:

1. First, consider creating a backup as this process will delete all user data and reset all global settings.

2. Upgrade to the current PROFILER operating system release software. If your Profiler is currently running a version older than 7.3.2 you need to update to that version first. You can find it here

https://www.kemper-amps.com/do…8/Older-Software-Versions

3. Switch the PROFILER Head or Rack model off and press and hold soft button 1 (left above the display) while powering it on into tuner mode. If you are a STAGE user press the soft button 1 and the SYSTEM button and power the unit on.

4. Keep holding the soft button until "System Maintenance " appears on the display.

5. In maintenance mode press "Recovery", "Init&Factory Content", "Yes", "Ok".

6. Then press the Reboot soft button and reboot or simply restart the PROFILER with the chicken-head knob.

Kemper Recovery Options

Kemper Profiler Recovery Options

Kemper Export/Import Performances

Kemper Export/Import Performances

Profiling Overview

---