Template:T8S to L1 Pro
Revision as of 17:21, 16 January 2022 by ST (talk | contribs) (Created page with "<noinclude></noinclude> There is a single ToneMatch port on the {{T8S}}. You can use this * To connect to an {{L1P}} ToneMatch Port using a ToneMatch Cable File:ToneMat...")
There is a single ToneMatch port on the T8S ToneMatch mixer. You can use this
- To connect to an L1 Pro[1] ToneMatch Port using a ToneMatch Cable or Network Cable
- Note: This is the mixer LEFT output
All of the Analog outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) still function while using the ToneMatch Port.
To run stereo, connect the second powered loudspeaker to one of the T8S ToneMatch mixer RIGHT Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve).
OR
- ToneMatch port on the T8S ToneMatch mixer to ToneMatch Power Supply for power and use the Analog Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) to the L1 Pro or other powered loudspeaker
- ↑ L1 Pro 8, L1 Pro 16, L1 Pro 32