Template:T8S to L1 Pro

There is a single ToneMatch port on the T8S ToneMatch mixer. You can use this

• To connect to an L1 Pro ToneMatch Port using a ToneMatch Cable
  

  ToneMatch cable
  or Network Cable
  

  Network cable
  • Note: This is the mixer LEFT output

All of the Analog outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) still function while using the ToneMatch Port.

To run stereo, connect the second powered loudspeaker to one of the T8S ToneMatch mixer RIGHT Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve).

Alternat connection

• ToneMatch port on the T8S ToneMatch mixer to ToneMatch Power Supply for power and use the Analog Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) to the L1 Pro or other powered loudspeaker

---