Template:T8S to L1 Pro

T8S to Single L1 Pro

There is a single ToneMatch port on the T8S ToneMatch mixer. You can use this

• To connect to an L1 Pro ToneMatch Port using a ToneMatch Cable
  

  ToneMatch cable
  or Network Cable
  

  Network cable
  • Note: This is the mixer LEFT output. Anything panned hard RIGHT will not be heard.

All of the Analog outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) still function while using the ToneMatch Port.

To run stereo, connect the second powered loudspeaker to one of the T8S ToneMatch mixer RIGHT Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) to the second L1 Pro Input three. DO NOT USE an XLR to XLR cable. The output of the T8S ToneMatch mixer outputs is too hot for the L1 Pro XLR inputs.

Alternate connection

• ToneMatch port on the T8S ToneMatch mixer to ToneMatch Power Supply for power and use the Analog Outputs (XLR or 1/4 inch (6.3 mm) Tip-Ring-Sleeve) to the L1 Pro Input three. DO NOT USE an XLR to XLR cable. The output of the T8S ToneMatch mixer outputs is too hot for the L1 Pro XLR inputs.

---