Template:Sub2 with Sub1

From Bose Portable PA Encyclopedia
Revision as of 01:57, 2 November 2024 by ST (talk | contribs)
Jump to: navigation, search

You can use a Sub1 and Sub2 together. The connection will be L1 Pro32 to Sub2 to Sub1

There are two options. Either is fine. Choose the one you prefer.

Option 1
Same EQ to both Sub1 and Sub2 (37 Hz to 200 Hz)
  • Connect the L1 Pro32 to the Sub2 (use the supplied SubMatch cable)
  • Connect the Sub2 to the Sub1 use a SubMatch cable (purchased separately) OR
    • Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.
    • On the Sub2 set the Line Out EQ to Full (Full Range)
  • Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs
  • Polarity: Plus on both
Option 2
37 Hz to 100 Hz to Sub2, 100 Hz to 200 Hz to Sub1
  • Connect the L1 Pro32 to the Sub2 (use the SubMatch cable)
  • On the Sub2 set the Line Out EQ to HPF (High Pass Filter)
  • Connect the Sub2 Line Out to the Sub1 with an XLR cable and power the Sub1 with the supplied IEC power cable.
  • Level - set to 12:00 o'clock on both. If adjustments are necessary - keep the Level Control the same on both Subs
  • Polarity: Plus on both
Retrieved from "https://toonz.ca/bose/wiki/index.php?title=Template:Sub2_with_Sub1&oldid=24911"