PS1 Powerstand Connections/Line Out/Insert

From Bose Portable PA Encyclopedia
Revision as of 14:14, 14 November 2006 by ST (talk | contribs) (first ed)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Line Out from Insert Point

  • access from the "ring" connection at the Insert Point
  • post trim
  • post R1 Remote Channel Level

For Channels One or Two insert a 1/4 inch cable halfway into the Insert jack to get a signal that is controlled by the volume control on the Remote. This is also known as the Half Insert method. For more information about 1/4 cables see Tip Ring Sleeve connections.

PS1LineOutInsert.jpg