Mixer / Behringer / UB1002FX

From Bose Portable PA Encyclopedia
Revision as of 08:04, 22 May 2007 by Wikiword (talk | contribs)
Jump to: navigation, search

Behringer UBX 1002FX Mixer

Summary

Use unbalanced ¼ inch Tip-Sleeve phone jack cables from the Mixer to the PS1 Power Stand (Classic) / Model I.

BehringerUB1202FXOutput.png

Use the ¼ inch phone jack (Tip-Sleeve) outputs to

The main outputs from this mixer are unbalanced ¼ inch Tip-Sleeve phone jacks that you can run to the Channel 1 or 2 ¼ inch Tip-Sleeve inputs.


Outputs

¼ Inch with suitable output

for PS1 Powerstand Channel 1 or 2 inputs

You can use TS (Tip Sleeve) unbalanced cables, or TRS (Tip Ring Sleeve) balanced cables, but since the ¼ inch phone connections at the Bose Classic and Model I Power Stand are unbalanced there is no particular benefit using balanced cables.

¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Sleeve to Tip-Sleeve

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Ring-Sleeve to Tip-Sleeve

This should work fine.

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)

Tip-Ring-Sleeve to Tip-Ring-Sleeve

This should also work, but likely no better than a simple ¼ Inch Tip-Sleeve to Tip-Sleeve cable. This is because the ¼ Inch input on the Bose System is Tip-Sleeve (unbalanced) anyway.


Links:


Note: the UB1002FX and UB1202FX share the same manual.

BehringerUB1002-UB1202FX.png






































index.html art1.php art10.php art11.php art12.php art13.php art14.php art15.php art16.php art17.php art18.php art19.php art2.php art20.php art21.php art22.php art23.php art24.php art25.php art26.php art27.php art28.php art29.php art3.php art30.php art31.php art32.php art33.php art34.php art35.php art36.php art37.php art38.php art39.php art4.php art40.php art41.php art42.php art43.php art44.php art45.php art46.php art47.php art48.php art49.php art5.php art50.php art51.php art6.php art7.php art8.php art9.php