Difference between revisions of "Bose S1 Pro Compared to Bose L1® Compact"

From Bose Portable PA Encyclopedia FAQ & Wiki
Jump to: navigation, search
m (correct watts 80 not 40)
m (transducers)
Line 30: Line 30:
 
</td>
 
</td>
 
<td>106 dB / 112 dB peak
 
<td>106 dB / 112 dB peak
 +
</td>
 +
</tr>
 +
 +
 +
<tr>
 +
<td>Transducers (drivers)
 +
</td>
 +
<td>Three 2.00" (51 mm)
 +
high-excursion drivers mounted in a curved Articulated Array® loudspeaker coupled with an integral 6" (152 mm) low-frequency
 +
driver mounted in a ported bass enclosure
 +
</td>
 +
<td>Six 2.00" (51 mm)
 +
high-excursion drivers mounted in a curved Articulated Array® loudspeaker coupled with an integral 8" (203 mm) low-frequency
 +
driver mounted in a ported bass enclosure
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 09:47, 3 February 2018

FeatureBose S1 ProBose L1® Compact
S1 Pro Tilt-Back.jpg height:280px
Horizontal dispersion 100 degrees 180 degrees
Vertical dispersion 40 degrees 40 degrees
Output 103 dB / 109 dB peak 106 dB / 112 dB peak
Transducers (drivers) Three 2.00" (51 mm)

high-excursion drivers mounted in a curved Articulated Array® loudspeaker coupled with an integral 6" (152 mm) low-frequency driver mounted in a ported bass enclosure

Six 2.00" (51 mm)

high-excursion drivers mounted in a curved Articulated Array® loudspeaker coupled with an integral 8" (203 mm) low-frequency driver mounted in a ported bass enclosure

Frequency Response
  • 70 Hz – 16 kHz +/- 3dB
  • 65 Hz – 14 kHz +/- 3dB
  • 50 Hz - 16 Hz (-10 dB)
Power to speakers 80 Watts 120 Watts
Weight
  • 6.5 kg (14.3 lbs) – Without Battery
  • 7.0 kg (15.5 lbs) – With Battery
Total system weight 13.4 kg (30.2 lb)
  • Power Stand: 11.2 kg (24.6 lb)
  • Extensions (each): 1.1 kg (2.3 lb)
Multiple orientations
  • Elevated Surface
    Position the S1 Pro on a surface. This projects sound clearly and evenly throughout the audience, and ensures that audience members enjoy the full frequency range of the system.
  • Tilt-Back
    For performances where your audience is close to you, tilt the S1 Pro onto its back edge. For best results, the performer should stand or sit to one side of the loudspeaker to avoid blocking sound from the audience.
  • Monitor
    To use the S1 Pro as a personal floor monitor, place it on the ground horizontally, in front of and pointing toward the performer. Tilt the loudspeaker onto its side edge.
  • Speaker Stand
    Place one or two S1 Pro systems on speaker stands (sold separately) for general-purpose sound reinforcement. Monitor
  • Table Top (no extensions)
  • Floor with both extensions
    (no speaker stand required)
  • Floor with one extensions
Bluetooth input Yes: Channel 3 No
Reverb Yes No
ToneMatch® Presets Switchable on Channels 1 and 2 Fixed on Channel 1, switchable on Channel 2
Battery Optional internal No
Speaker Array 3 elements plus woofer behind the array 6 elements plus woofer in power stand