File:XLR to TRS mp106.jpg

From Bose Portable PA Encyclopedia
Jump to: navigation, search
XLR_to_TRS_mp106.jpg ‎(600 × 458 pixels, file size: 51 KB, MIME type: image/jpeg)

http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml

Technical Description:

The EWI MP-105 is a special application adaptor cable for converting XLR to 1/4 TRS. This cable is typically used to plug XLR cord into balanced 1/4" TRS panel jacks commonly found on mixing consoles and processing equipment.

The Female XLR end is wired through to the 1/4" Male TRS end as follows: 

   Pin One FXLR to Sleeve of MTRS

   Pin Two FXLR to Tip of MTRS

   Pin Three FXLR to Ring of MTRS

The 1/4" MTRS end is an EWI model P292S-BKG

The FXLR end is an EWI model ES3FB-GDP

The cable itself is constructed with 99.98% pure 22ga. high strand count copper conductors.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current03:37, 6 December 2013Thumbnail for version as of 03:37, 6 December 2013600 × 458 (51 KB)ST (talk | contribs)http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml Technical Description: The EWI MP-105 is a special application adaptor cable for converting XLR to 1/4 TRS. This cable is typically used to plug XLR cord in
  • You cannot overwrite this file.

The following file is a duplicate of this file (more details):

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.
Retrieved from "https://toonz.ca/bose/wiki/index.php?title=File:XLR_to_TRS_mp106.jpg&oldid=16160"