File:Kemper Stage - Sennheiser Wireless overview.jpg

Summary

This article expresses my opinion and experience. Please post comments to Twitter @ST_Muso or LinkedIn @STPro. Thank you — ST.

Contents

• 1 Summary
• 2 In-Ear Monitors for an L1 User?
• 3 Guitar to Kemper Stage using Sennheiser EW-D/EW-DP
  • 3.1 Links to the equipment mentioned
• 4 EW-D and EW-DP
• 5 Kemper Stage to PA using Sennheiser XSW-D XLR Base Set

In-Ear Monitors for an L1 User?

Guitar to Kemper Stage using Sennheiser EW-D/EW-DP

This is the latest EW-D / EW-DP system from Sennheiser. It's digital UHF (not 2.4 GHz).

I was using the Sennheiser EW-D system with the Kemper Power Rack. The receiver is rack-mountable, and this all works as expected. But when using the Profiler Stage, I wanted a smaller receiver that worked on batteries. The regular EW-D and EW-DX systems are half-rack units powered by an AC adapter.

Sennheiser recently released the EW-DP (portable) system. The tiny receiver is magnetically mounted on a camera hot shoe. The EW-DP system is compatible with the EW-D systems, and you can purchase the receiver separately.

The receiver comes with an XLR cable, so I used an XLR to 6.5 mm Tip-Sleeve adapter (with a built-in Lo-Z to Hi-Z transformer). Everything works great. The magnetic mount snaps right onto the Stage and tenaciously sticks in place.

The transmitter and receiver can run on AA batteries, but I use the Sennheiser rechargeable battery pack for 7-10 hours of runtime.

Links to the equipment mentioned

[Sennheiser EW-D CI1 instrument set]

[Sennheiser EW-DP EK receiver (comes with rechargeable battery)]

[XLR to 6.5 mm Lo-Z to Hi-Z impedance transformer/adapter]

(It doesn't have to be this Shure model. A generic one will work.)

EW-D and EW-DP

I recently switched to the Sennheiser EW-DX system because the half-rack receiver handles two channels. This means I can fit the receiver for the guitar and vocal mic AND the IEM transmitter in a single 1U slot in my rack unit. Typically, you wouldn't mount the IEM transmitter and guitar/mic receiver in the same rack unit, but I'm running external antennas outside the rack - so it's all fine.

[Sennheiser EW-DX Dual system]

[Sennheiser IEM G4]

• See also: In Ear Monitors for an L1 User

Kemper Stage to PA using Sennheiser XSW-D XLR Base Set

[Sennheiser XSW-D XLR Base set]

(two, to try it out in stereo).

I ran two of them to my PA. Everything sounded fine. It worked with, and without the Stage Main Output Level set to -12 dB. No unwanted distortion.

I don't normally do this because I have a snake with the power cable and a balanced cable for the line out. But since V8guitar asked, I thought I'd check it out.

Just for fun, I ran the wireless units to a pair of Bose S1 Pro units (battery-powered).