Difference between revisions of "Mixer / Yamaha / MG124 CX"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
m
m (¼ inch jack inch to ¼ inch)
Line 11: Line 11:
 
<table><tr><td valign="top">
 
<table><tr><td valign="top">
 
This mixer has &frac14; inch jack balanced outputs. Any of the cables shown below should work.
 
This mixer has &frac14; inch jack balanced outputs. Any of the cables shown below should work.
</td><td>
+
 
  
 
===== &frac14; Inch Tip-Ring-Sleeve (balanced) to ¼ Inch  Tip-Ring-Sleeve (balanced)  =====
 
===== &frac14; Inch Tip-Ring-Sleeve (balanced) to ¼ Inch  Tip-Ring-Sleeve (balanced)  =====

Revision as of 12:47, 19 September 2012

To use a Yamaha MG124 CX Mixer with the L1 Model II

On the mixer

  • pan all the inputs hard LEFT
  • run a line out of the LEFT output to the Model II Power Stand Analog input (cable details below)

YamahaMG124 to Model II Power Stand Analog Input.png

Cable Details

¼ inch jack inch to ¼ inch

This mixer has ¼ inch jack balanced outputs. Any of the cables shown below should work.


¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Ring-Sleeve (balanced)

The output of this mixer is balanced, and the input on the Model II Power Stand is also balanced, so this is the preferred method.

Tip-Ring-Sleeve to Tip-Ring-Sleeve

¼ Inch Tip-Sleeve (unbalanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Sleeve to Tip-Sleeve

¼ Inch Tip-Ring-Sleeve (balanced) to ¼ Inch Tip-Sleeve (unbalanced)

Tip-Ring-Sleeve to Tip-Sleeve