S1 Pro Power Switch
What switch position is standby?
S1 Pro System with battery installed
- In Use
- Set the power switch to the top position (on).
- When you are not using the S1 Pro System you can leave the power switch in the standby position (middle) or the quick-charge position (bottom).
If the S1 Pro System is not connected to AC power, it won't matter if you choose the middle or bottom position.
- In Transit
- You can put the S1 Pro System power switch in the bottom position (quick charge) position when transporting the unit. This may reduce the likelihood the switch will get bumped to the on position.
- When you are charging the S1 Pro System you can put the power switch in the standby position (middle) or the quick-charge position (bottom).