Difference between revisions of "T1 ToneMatch® Audio Engine / Daisy Chain"
m |
|||
| Line 17: | Line 17: | ||
*It would be possible to have a third {{t1r}} connected to {{t1r}} #1 Channel 5 | *It would be possible to have a third {{t1r}} connected to {{t1r}} #1 Channel 5 | ||
*Related discussion in the message board [http://bose.infopop.cc/eve/forums/a/tpc/f/8146026354/m/4711091695 T1® Daisy Chain]<br> | *Related discussion in the message board [http://bose.infopop.cc/eve/forums/a/tpc/f/8146026354/m/4711091695 T1® Daisy Chain]<br> | ||
| + | |||
| + | Here's how you can do the same thing with a {{Compact}} | ||
| + | |||
| + | [[Image:T1 Daisy Chain to Compact.png]] | ||
---- | ---- | ||
Revision as of 14:21, 14 May 2015
You can daisy chain (connect) one T1 ToneMatch Audio Engine into another.
In this example we have two T1 ToneMatch Audio Engines. (T1®s)
- T1® on the left connected to the L1 Model II through the ToneMatch® Port
- T1®on the right connected to the T1® on the left through the Master Analog ¼ inch jack to the other T1® Channel 4
This allows the performer using T1® #1 to control the overall volume of both T1®s. If the performer controlling T1® # does not adjust the volume of Channel 4, Changing the Master Volume maintains the relative balance between T1® #1 and T1® #2
Notes:
- T1® #2 will require the optional T1 ToneMatch® Audio Engine power supply
- It would be possible to have a third T1® connected to T1® #1 Channel 5
- Related discussion in the message board T1® Daisy Chain
Here's how you can do the same thing with a L1 Compact
