T1 ToneMatch® Audio Engine / Daisy Chain

From Bose Portable PA Encyclopedia
Revision as of 11:08, 7 December 2008 by ST (talk | contribs) (first ed)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

You can daisy chain one T1 ToneMatch Audio Engine into another.

T1x2IntoModelIIa.gif

In this example we have

  1. the T1 ToneMatch® Audio Engine on the left connected to the L1 Model II through the ToneMatch® port
  2. the T1 ToneMatch® Audio Engine on the right connected to the T1 ToneMatch® Audio Engine on the left through the Master Analog ¼ inch jack to the other T1 ToneMatch® Audio Engine Channel 4

This allows the performer using T1 ToneMatch® Audio Engine #1 to control the overall volume of both T1 ToneMatch® Audio Engines. If the performer controlling T1 ToneMatch® Audio Engine # does not adjust the volume of Channel 4, but then changing the Master Volume only maintains the relative balance between T1 ToneMatch® Audio Engine #1 and T1 ToneMatch® Audio Engine #2


Retrieved from "https://toonz.ca/bose/wiki/index.php?title=T1_ToneMatch®_Audio_Engine_/_Daisy_Chain&oldid=9463"