T1 ToneMatch® Audio Engine / Headphones

From Bose Portable PA Encyclopedia FAQ & Wiki
Jump to: navigation, search

If you want to listen to the T1® through headphones - just connect to the headphones to the T1® ¼ inch Master Output.

T1MasterOutput.png


At that point you will have sound coming from both the headphones and the Model II (if you have one). If you are using a Classic or Model I, then you will be replacing the output to the L1® with the headphones, and you can skip down to Mono (below)

To mute the sound out of the L1 Model II,

  1. turn the Rotary Selector to Prefs
  2. set the menu to Master Out
  3. set the Master Out to Pre Master Volume

Turn down the Master Volume knob. This will allow you to hear the T1® through the headphones with no sound coming from the Model II.

You will control the volume you hear with the individual T1® Channel Volume controls.

Mono

In the headphones you will be hearing mono, with the channels (left and right) 180° out of phase. This will not sound odd, and there will be no interaction between the channels because the sound from the left and right transducers (headphones) are not mixing in the air.