Difference between revisions of "T1 ToneMatch® Audio Engine / XLR Inputs Sensitivity"
m (formatting for inclusion) |
m (<noinclude></noinclude>) |
||
| Line 1: | Line 1: | ||
| + | <noinclude> | ||
=== XLR Inputs — No [[Pad]]s required === | === XLR Inputs — No [[Pad]]s required === | ||
| − | + | </noinclude> | |
| − | <noinclude>{{T1 icon}}</noinclude> | + | <noinclude>{{T1 icon}}</noinclude> The T1® XLR inputs on channels 1-3 were designed to accept inputs from microphones up to normal line-level inputs without needing a switch or a [[Pad|pad]]. This is in unlike the {{Model I}} or {{Classic}}) Power Stand where a [[Pad|pad]] is recommended for line-level inputs. |
| − | The T1® XLR inputs on channels 1-3 were designed to accept inputs from microphones up to normal line-level inputs without needing a switch or a [[Pad|pad]]. This is in unlike the {{Model I}} or {{Classic}}) Power Stand where a [[Pad|pad]] is recommended for line-level inputs. | ||
:The {{T1 nl}} Channels 1, 2, 3 inputs will accept a wide range of signals. We have not encountered a normal use where someone needed a [[Pad|pad]] - even using +4dbU console outputs, which is as high as it gets. <br>— MikeZ-at-Bose<ref>MikeZ-at-Bose talks about [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/3931088695?r=1631099695#1631099695 T1® XLR inputs]</ref> | :The {{T1 nl}} Channels 1, 2, 3 inputs will accept a wide range of signals. We have not encountered a normal use where someone needed a [[Pad|pad]] - even using +4dbU console outputs, which is as high as it gets. <br>— MikeZ-at-Bose<ref>MikeZ-at-Bose talks about [http://bose.infopop.cc/eve/forums/a/tpc/f/7521050644/m/3931088695?r=1631099695#1631099695 T1® XLR inputs]</ref> | ||
Revision as of 01:21, 13 December 2008
XLR Inputs — No Pads required
The T1® XLR inputs on channels 1-3 were designed to accept inputs from microphones up to normal line-level inputs without needing a switch or a pad. This is in unlike the L1 Model I or L1 Classic) Power Stand where a pad is recommended for line-level inputs.
- The T1 ToneMatch® Audio Engine Channels 1, 2, 3 inputs will accept a wide range of signals. We have not encountered a normal use where someone needed a pad - even using +4dbU console outputs, which is as high as it gets.
— MikeZ-at-Bose[1]
- ↑ MikeZ-at-Bose talks about T1® XLR inputs