T1 ToneMatch® Audio Engine / XLR Inputs Sensitivity

From Bose Portable PA Encyclopedia FAQ & Wiki
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

XLR Inputs — No Pads required

T1 This information is applicable to the T1 ToneMatch® audio engine

The T1® XLR inputs on channels 1-3 were designed to accept inputs from microphones up to normal line-level inputs without needing a switch or a pad. This is in unlike the L1 Model I or L1 Classic) Power Stand where a pad is recommended for line-level inputs.

The T1 ToneMatch® Audio Engine Channels 1, 2, 3 inputs will accept a wide range of signals. We have not encountered a normal use where someone needed a pad - even using +4dbU console outputs, which is as high as it gets.
— MikeZ-at-Bose[1]

  1. MikeZ-at-Bose talks about T1® XLR inputs