Revision as of 12:00, 17 March 2013
Please note: Bose recommends that if you have two L1® Systems using the same source, that the L1®s be placed at least 20 feet apart (6 meters). This is to avoid Multiple Source Interference
- System 1
Connect the first system with the ToneMatch cable that came with the T1®.
- T1® ToneMatch port to Model II Power Stand ToneMatch port.
|
- System 2
Connect the second system with a ¼ inch jack Tip-Ring-Sleeve cable
- T1® Master Output to Model II Power Stand Analog input
- on the Model II Power Stand set the analog input trim to "3" and adjust as necessary to get a good balance with the other system.
- For best results use a Tip-Ring-Sleeve (balanced) connection.
You can use a Tip-Sleeve (unbalanced connection) but the Tip-Ring-Sleeve (balanced connection is preferred).
|