T1 ToneMatch® Audio Engine to Two Model II Power Stands

Please note: Bose recommends that if you have two L1® Systems using the same source, that the L1®s be placed at least 20 feet apart (6 meters). This is to avoid Multiple Source Interference

System 1 Connect the first system with the ToneMatch cable that came with the T1®. T1® ToneMatch port to Model II Power Stand ToneMatch port.

System 2 Connect the second system with a ¼ inch jack Tip-Ring-Sleeve cable T1® Master Output to Model II Power Stand Analog input on the Model II Power Stand set the analog input trim to "3" and adjust as necessary to get a good balance with the other system. For best results use a Tip-Ring-Sleeve (balanced) connection. You can use a Tip-Sleeve (unbalanced connection) but the Tip-Ring-Sleeve (balanced connection is preferred).

---