Difference between revisions of "T4S Connection to L1 Model I"

Revision as of 12:33, 30 January 2020

There's a slight difference because there are two 1/4 inch (6.3 mm) output jacks on the T4S for Left and Right Outputs.

You've got two ways to handle this:

Pan all your inputs to one side (e.g. Right) and connect the T4S Right output to the L1® Classic Channel 3 (try setting the level to about 4)

OR
Leave your inputs panned to center (the default setting), and connect
- T4S Left output to the L1® Classic Channel 3
  try setting the level to about 4
- T4S Right output to the L1® Classic Channel 4
  try setting the level to about 4

When using a T1 ToneMatch Audio Engine or T4S ToneMatch mixer with the L1® Classic, you don't need to use the R1 Remote.

If you want to run a {T4S} with two L1 Model I or L1 Classic

When using a T1 ToneMatch Audio Engine or T4S ToneMatch mixer with the L1® Classic, you don't need to use the R1 Remote.

@@ Line 1: / Line 1: @@
 {{Classic icon}}{{T4S icon}}
-You can connect the {{T4S}} to the {{Classic}} or {{Model I}}, just as you would a T1®. You'll need a [[T1 ToneMatch® Audio Engine power supply|ToneMatch Power Supply]]
+You can connect the {{T4S}} to the {{Classic}} or {{Model I}}, just as you would a {{T1}}. You'll need a [[T1 ToneMatch® Audio Engine power supply|ToneMatch Power Supply]]
 There's a slight difference because there are two 1/4 inch (6.3 mm) output jacks on the T4S for Left and Right Outputs.
@@ Line 13: / Line 13: @@
-When using a T1® or T4S with the L1® Classic, you don't need to use the R1 Remote.
+When using a {{T1}} or {{T4S}} with the L1® Classic, you don't need to use the R1 Remote.
+;Stereo
+If you want to run a {T4S} with two {{Model I}} or {{Classic}}
+[[File:T4S to two L1 Classic Model I.jpg]]
+When using a {{T1}} or {{T4S}} with the L1® Classic, you don't need to use the R1 Remote.