Difference between revisions of "Talk:Mixer / Behringer / UB1222FX-Pro"
m |
m |
||
| Line 14: | Line 14: | ||
== Mon out is pre fader. == | == Mon out is pre fader. == | ||
| − | It turns out that the Mon Out is pre-fader (thanks to [User:HellDad|HellDad]] for pointing that out. So I re-wrote the article to recommend using the XLR Main outputs. | + | It turns out that the Mon Out is pre-fader (thanks to [[User:HellDad|HellDad]] for pointing that out. So I re-wrote the article to recommend using the XLR Main outputs. |
| + | [[User:ST|ST]] 12:41, 14 August 2007 (GMT-7) | ||
Revision as of 01:41, 14 August 2007
Behringer Mixer UB1222FX Outputs?
I use one of these mixers, and it doesn't have 1/4" TRS or TS outputs for main L/R - only male XLR. I thought maybe I could put a note in the article to that effect, but then thought I better mention it on this discussion page first. Not least because I have zero experience and knowledge on the subject of editing a Wiki (apart from the recent hour of tutorials).
HellDad 09:59, 14 August 2007 (GMT-7)
XLR or ¼ inch Main Outs
Thanks HellDad,
I'll find a way to incorporate that into the main article.
Much appreciated ST 10:03, 14 August 2007 (GMT-7)
Mon out is pre fader.
It turns out that the Mon Out is pre-fader (thanks to HellDad for pointing that out. So I re-wrote the article to recommend using the XLR Main outputs. ST 12:41, 14 August 2007 (GMT-7)