Difference between revisions of "Talk:Mixer / Behringer / UB1222FX-Pro"
m (aha, the ¼ inch output is the Mon Out) |
m (Talk:Mixer/Behringer/UB1222FX-Pro moved to Talk:Mixer / Behringer / UB1222FX-Pro: naming convention) |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 12: | Line 12: | ||
Much appreciated [[User:ST|ST]] 10:03, 14 August 2007 (GMT-7) | Much appreciated [[User:ST|ST]] 10:03, 14 August 2007 (GMT-7) | ||
| − | |||
| − | I | + | == Mon out is pre fader. == |
| − | + | It turns out that the Mon Out is pre-fader (thanks to [[User:HellDad|HellDad]]) for pointing that out. So I re-wrote the article to recommend using the XLR Main outputs. | |
| − | + | [[User:ST|ST]] 12:41, 14 August 2007 (GMT-7) | |
| − | |||
| − | [[User:ST|ST]] | ||
Latest revision as of 02:59, 21 December 2008
Behringer Mixer UB1222FX Outputs?
I use one of these mixers, and it doesn't have 1/4" TRS or TS outputs for main L/R - only male XLR. I thought maybe I could put a note in the article to that effect, but then thought I better mention it on this discussion page first. Not least because I have zero experience and knowledge on the subject of editing a Wiki (apart from the recent hour of tutorials).
HellDad 09:59, 14 August 2007 (GMT-7)
XLR or ¼ inch Main Outs
Thanks HellDad,
I'll find a way to incorporate that into the main article.
Much appreciated ST 10:03, 14 August 2007 (GMT-7)
Mon out is pre fader.
It turns out that the Mon Out is pre-fader (thanks to HellDad) for pointing that out. So I re-wrote the article to recommend using the XLR Main outputs. ST 12:41, 14 August 2007 (GMT-7)