Template:Compatibility with Other Members of the L1® Family of Products

This Page Reviewed By Bose

{{#Click:L1 Cylindrical Radiator® loudspeaker|Image:L1Disassembled.gif|Cylindrical Radiator®}}

• The Cylindrical Radiator speaker sections of the L1 Classic, the L1 Model I and the L1 Model II are not compatible with each other.
  • The Cylindrical Radiator speaker sections of the L1 Classic can only be used with the Classic PS1 power stand (no orange markings on the input/output panel).
  • The Cylindrical Radiator speaker sections of the L1 Model I (orange markings on the back of both sections) can only be used with the Model I PS1 power stand (orange markings on the input/output panel.
  • The Cylindrical Radiator speaker sections of the L1 Model II can only be used with the L1 Model II power stand.
  • The Cylindrical Radiator speaker sections of the L1 Model 1S can only be used with the L1 Model 1S power stand.
• The T1 ToneMatch Audio Engine can be used with the
  • L1 Classic
  • L1 Model I
  • L1 Model 1S
  • L1 Model II
  • L1 Compact
• The PackLite^® power amplifier model A1 can be used with
  • L1 Classic
  • L1 Model I
  • L1 Model II.
• The B1 Bass Module can be used with the
  • L1 Classic
  • L1 Model I
  • L1 Model II.
• The B2 Bass Module can be used with the
  • L1 Classic Normal Mode only
  • L1 Model I Normal Mode only
  • L1 Model 1S all modes
  • L1 Model II all modes but Firmware version 1.4 or later required