Difference between revisions of "Template:Summing Devices"
m (→Summing Devices) |
m |
||
| Line 2: | Line 2: | ||
If you have a stereo device (and do not the extra features of a mixer then you can consider a summing device). The following notes are not specific recommendations or endorsements. | If you have a stereo device (and do not the extra features of a mixer then you can consider a summing device). The following notes are not specific recommendations or endorsements. | ||
| − | ==== ⅛ stereo source ==== | + | ==== ⅛ (3.5 mm) stereo source ==== |
| − | If your source is a ⅛ stereo jack you can use something like this: | + | [[Image:18MaleToMale.png|thumb|200px|right|⅛ inch (3.5 mm) stereo jack]] |
| + | If your source is a ⅛ (3.5 mm) stereo jack you can use something like this: | ||
<!-- | <!-- | ||
{{#Click:Target|Image:Example.png|300px|Caption is here.}} | {{#Click:Target|Image:Example.png|300px|Caption is here.}} | ||
Revision as of 22:57, 13 July 2014
Summing Devices
If you have a stereo device (and do not the extra features of a mixer then you can consider a summing device). The following notes are not specific recommendations or endorsements.
⅛ (3.5 mm) stereo source
If your source is a ⅛ (3.5 mm) stereo jack you can use something like this:
{{#Click:http://whirlwindusa.com/catalog/black-boxes-effects-and-dis/transformers-isolation-devices/isopod%7CImage:WhirlwindIsopod.png%7C300px%7CWhirlwind Isopod.}}
The output side is XLR so you will also need a converter or cable that is XLR female to Balanced ¼ inch jack Tip-Ring-Sleeve.
{{#Click:http://www.audiopile.net/products/Mic_Instr_Cables/MP_Adaptor_Cbls/MP-105/MP-105_cutsheet.shtml%7CImage:XLRtoTRS.png%7C300px%7CFemale XLR to 1/4" Male TRS Balanced Adaptor Cable.}}
Thanks to Richard Mills for the suggestion.
RCA stereo source
If your source is stereo RCA you can use something like this:
{{#Click:http://whirlwindusa.com/catalog/black-boxes-effects-and-dis/direct-boxes/pcdi%7CImage:WhirlwindpcDI.png%7C300px%7CWhirlwind pcDI.}}
OR
{{#Click:http://www.procosound.com/iface%7CImage:ProCoiFace.png%7C300px%7Cproco iFace.}}
Thanks to Dan Rosebach for the suggestion.