Difference between revisions of "ToneMatch Mixer to Mackie SRM Loudspeaker"
m (→1/4 inch (6.3mm) Tip-Ring-Sleeve cable connections) |
m (→XLR cable connections) |
||
| Line 20: | Line 20: | ||
[[File:Mackie SRM 350 input from ToneMatch Mixer XLR.jpg|800px]] | [[File:Mackie SRM 350 input from ToneMatch Mixer XLR.jpg|800px]] | ||
| − | + | {{XLR to XLR}} | |
---- | ---- | ||
[[Category:Mackie]] | [[Category:Mackie]] | ||
[[Category:T4S]] | [[Category:T4S]] | ||
[[Category:T8S]] | [[Category:T8S]] | ||
Latest revision as of 07:41, 6 January 2019
Connect a ToneMatch mixer to a Mackie SRM series loudspeaker
Overview
Here is an excerpt from the Mackie SRM 350 Owners Manual.
You can connect using XLR or 1/4 inch (6.3mm) Tip-Ring-Sleeve cables, whichever is most convenient. There is no advantage to using one over the other.
1/4 inch (6.3mm) Tip-Ring-Sleeve cable connections
This applies to both T4S and T8S Tonematch mixers.
The output side is 1/4 inch (6.35 mm) Tip-Ring-Sleeve jack and the input on the Bose side is 1/4 inch (6.35 mm) Tip-Ring-Sleeve jack. Use a cable like this.
.
1/4" TRS Balanced Patch Cable (audiopile.net)
XLR cable connections
This applies to only the T8S Tonematch mixer.
XLR cables provide a balanced connection. These are often used for microphones but they are also fine for line level connections.
