View source for Preowned L1 Model II Considerations

<table><tr>
<td valign="top" width="250">__TOC__</td>
<td valign="top">If you are considering purchasing a pre-owned {{Model II}} or {{Model 1S}} here are some things to consider.
</td>
</tr></table>  

== General Inspection ==
Check for signs of wear and tear, scratches or dents in the Cylindrical Radiator®s, the Power Stand, and {{B1}} or {{B2}} bass modules.
[[File:L1Disassembled.gif|right]] Check the Cylindrical Radiator® sections under good light for dents and scratches. These won't affect the operation of the unit, but it's good to find these now instead of under stage lights later.

== Fan ==
{{#lst:L1® Model II|heat}}

== Legs ==
Make sure the legs open and close smoothly.

Check that the legs are not wobbly or loose.

Check that when the legs are fully extended, the Power Stand is stable and level.

[[File:BaseLegsFolded.jpg|400px]]
[[File:BaseLegsNearlyClosed.jpg|400px]]
[[File:BaseLegsNearlyOpen.jpg|400px]]
[[File:BaseLegsOpen.jpg|400px]]

== Periodic Maintenance ==
Check the inside of the Power Stand well for signs of excessive wear and dirt or debris.

{{:L1® Model II / Preventative Care}}

== Connectors ==
Check the connectors in the Power Stand and the Cylindrical Radiator® sections. Make sure the connectors are seated properly (not pushed in or misaligned). The pictures below are from an {{Model I}} but they are still useful.

{{PS1 Damaged Connectors}}

== B2 ==
If the system you are considering has a {{B2}} consider these points

=== B2 Bass Level Switch ===
If the system has a {{B2}}
check that the B2 Bass Level switch works in all three positions. If it does, then the L1 Model II Power Stand firmware is up to date.

{{#lst:B2|B2 Switch}}

== ToneMatch Mixer ==