Difference between revisions of "Effect / Alesis / PicoVerb"

From Bose Portable PA Encyclopedia
Jump to: navigation, search
(updated images for one channel and two channels)
m
Line 1: Line 1:
 
<big>''' Alesis PicoVerb '''</big>  
 
<big>''' Alesis PicoVerb '''</big>  
 +
 +
{{:PS1 Powerstand/Effects/Serial}}
  
 
== Reference ==
 
== Reference ==
Line 23: Line 25:
 
Note - you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).
 
Note - you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).
  
{{:PS1 Powerstand/Effects/Serial}}
 
  
 
There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/9891067142 Original post in the Bose® Musicians Community Message Boards]</ref>  
 
There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/9891067142 Original post in the Bose® Musicians Community Message Boards]</ref>  

Revision as of 17:32, 23 June 2009

Alesis PicoVerb


Connections at the PS1 Power Stand (Classic) / Model I

Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual

PS1InsertParallela.png

Insert Cable

Typical Insert Cable Hosa STP204

Hosa STP204 Insert Cable


A common problem is with the way some Insert Cables are labelled. This is how the connections are run at the Insert Point of the PS1 Powerstand.

TipRingSleevePS1.gif

and this is connected to one of the PS1 Powerstand Insert Points

Channel 1 and Channel 2 Insert Points (blue)



Reference

Alesis PicoVerb Connections

Excerpt from the Alesis PicoVerb Manual

AlesisXVerbPS1-1Channel.png

  • Blue "Ring" is Send from the Bose System
  • Purple "Tip" is the Return to the Bose System

From Page 15 in the Alesis PicoVerb Manual

alesisNanoVerb2.gif

Two Channels

It seems that with the Nanoverb you can use two channels when you operate in "stereo" mode. But you cannot control the left and right channels independently. So you can maintain the separation between the channels but not have them running different levels, mix, or effects.

AlesisXVerbPS1-2Channel.png

Note - you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).


There is more discussion in the Original post in the Bose® Musicians Community Message Boards</ref>