Difference between revisions of "Effect / Alesis / MidiVerb4"
m |
m (Effect/Alesis/MidiVerb4 moved to Effect / Alesis / MidiVerb4: naming convention) |
(No difference)
| |
Revision as of 17:33, 23 June 2009
Alesis MidiVerb
Contents
PS1 Power Stand (Classic) / Model I Connections
Connections at the PS1 Power Stand (Classic) / Model I
Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual
Insert Cable
Typical Insert Cable Hosa STP204
A common problem is with the way some Insert Cables are labelled. This is how the connections are run at the Insert Point of the PS1 Powerstand.
and this is connected to one of the PS1 Powerstand Insert Points
Reference
Alesis MidiVerb4 Connections
One PS1 Power Stand (Classic) / Model I Channel
Excerpt from the Alesis MidiVerb4 Manual (page 18)
- Blue "Ring" is Send from the Bose System
- Purple "Tip" is the Return to the Bose System
You will need one Insert Cable
Typical Insert Cable Hosa STP204
Two PS1 Power Stand (Classic) / Model I Channels
Excerpt from the Alesis MidiVerb4 Manual (page 18)
- Blue "Ring" is Send from the Bose System
- Purple "Tip" is the Return to the Bose System
You will need two Insert Cables. One for each Channel.
Typical Insert Cable Hosa STP204