Difference between revisions of "Effect / Alesis / NanoVerb"
(updated images for Alesis - one channel and two channels) |
m ({{Classic icon}}{{Model I icon}}) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
<big>''' Alesis Nanoverb '''</big> | <big>''' Alesis Nanoverb '''</big> | ||
| + | {{Classic icon}}{{Model I icon}} | ||
| + | {{:PS1 Powerstand/Effects/Serial}} | ||
== Reference == | == Reference == | ||
| Line 29: | Line 31: | ||
There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/9891067142 Original post in the Bose® Musicians Community Message Boards] | There is more discussion in the [http://bose.infopop.cc/eve/forums/a/tpc/f/301107819/m/9891067142 Original post in the Bose® Musicians Community Message Boards] | ||
| − | + | ||
---- | ---- | ||
Latest revision as of 17:33, 23 June 2009
Alesis Nanoverb
Contents
Connections at the PS1 Power Stand (Classic) / Model I
Serial Effects - Excerpt from the PS1 Power Stand (Classic) / Model I Manual
Insert Cable
Typical Insert Cable Hosa STP204
A common problem is with the way some Insert Cables are labelled. This is how the connections are run at the Insert Point of the PS1 Powerstand.
and this is connected to one of the PS1 Powerstand Insert Points
Reference
Alesis Nanoverb Connections
Excerpt from the Alesis NanoVerb Manual
Blue "Ring" is Send from the Bose System
Purple "Tip" is the Return to the Bose System
From Page 15 in the Alesis NanoVerb Manual
Two Channels
It seems that with the Nanoverb you can use two channels when you operate in "stereo" mode. But you cannot control the left and right channels independently. So you can maintain the separation between the channels but not have them running different levels, mix, or effects.
Note - you will need an INSERT cable for each Bose Channel you want to run through your effects unit. (up to 2 max).
There is more discussion in the Original post in the Bose® Musicians Community Message Boards