Difference between revisions of "Components don't fit"
m |
m |
||
| Line 1: | Line 1: | ||
{{Classic icon}} {{Model I icon}} {{Model II icon}} {{Compact icon}} | {{Classic icon}} {{Model I icon}} {{Model II icon}} {{Compact icon}} | ||
__TOC__ | __TOC__ | ||
| + | == Model I / Classic == | ||
| + | The components (Power Stand, Cylindrical Radiator®s) of these two L1® Models are NOT compatible or interchangeable. | ||
| − | + | IF | |
| + | * the components of your Classic / Model I / Model II don't fit together smoothly or | ||
| + | * the components don't come apart easily | ||
| + | |||
| + | THEN | ||
| + | :check that you have have matched components for each model. | ||
The components of the Classic are not compatible with the Model I or Model II. | The components of the Classic are not compatible with the Model I or Model II. | ||
| Line 8: | Line 15: | ||
{{:L1® Model I Orange L1® Markings}} | {{:L1® Model I Orange L1® Markings}} | ||
| − | |||
| Line 14: | Line 20: | ||
{{:L1® Model II / Preventative Care}} | {{:L1® Model II / Preventative Care}} | ||
| + | |||
| + | |||
| + | {{:L1® Compatibility}} | ||
Latest revision as of 12:07, 27 December 2011
Contents
Model I / Classic
The components (Power Stand, Cylindrical Radiator®s) of these two L1® Models are NOT compatible or interchangeable.
IF
- the components of your Classic / Model I / Model II don't fit together smoothly or
- the components don't come apart easily
THEN
- check that you have have matched components for each model.
The components of the Classic are not compatible with the Model I or Model II.
The L1 Model I has orange L1® Markings on the Power Stand and the L1 Cylindrical Radiator® loudspeaker sections. The other Models do not have these.
Power Stand
L1 Cylindrical Radiator® loudspeaker sections
Model II
There have been isolated incidents where Model II owners have had difficulty removing the Cylindrical Radiator® from the Power Stand.
- I would encourage all users that are concerned with this happening to them to add a drop of locktite to the (2) screws identified in the attached diagram.
- Thank you
- Neil — Source
Compatibility with Other Members of the L1® Family of Products
Cylindrical Radiator®s
Cylindrical Radiator®s are not interchangeable across models
Specifically (and without exception)
- The Cylindrical Radiator speaker sections of the L1 Classic, the L1 Model I and L1 Model 1S and the L1 Model II are not compatible with each other.
- The Cylindrical Radiator speaker sections of the L1 Classic can only be used with the Classic PS1 power stand (no orange markings on the input/output panel).
- The Cylindrical Radiator speaker sections of the L1 Model I (orange markings on the back of both sections) can only be used with the Model I PS1 power stand (orange markings on the input/output panel).
- The Cylindrical Radiator speaker sections of the L1 Model II can only be used with the L1 Model II power stand.
- The Cylindrical Radiator speaker sections of the L1 Model 1S can only be used with the L1 Model 1S power stand.
T1 ToneMatch® Audio Engine, T4S/T8S ToneMatch® Mixers
- The ToneMatch mixers can be used with the
PackLite® power amplifier Model A1
- The PackLite® power amplifier model A1 can be used with
B1 Bass Module
- The B1 Bass Module can be used with the
B2 Bass Module
- The B2 Bass Module can be used with the
- L1 Classic Normal Mode only
- L1 Model I Normal Mode only
- L1 Model 1S all modes
- L1 Model II all modes but L1® Model II Power Stand Firmware version 1.4 or later required