Difference between revisions of "Template:Kemper Profiler to Bose Portable PA"
m (→Connections) |
m |
||
| Line 3: | Line 3: | ||
Set everything flat on the ToneMatch mixer and control the guitar sound on the Profiler. If necessary, use the [[zEQ]] or [[ParaEQ]] to solve acoustic issues at the venue. That is: Use the Profiler to create your guitar sound. If necessary, use the zEQ and ParaEQ on the ToneMatch to deal with the environment. That way, when you move to a different environment, you don't have to make changes to the Profiler. | Set everything flat on the ToneMatch mixer and control the guitar sound on the Profiler. If necessary, use the [[zEQ]] or [[ParaEQ]] to solve acoustic issues at the venue. That is: Use the Profiler to create your guitar sound. If necessary, use the zEQ and ParaEQ on the ToneMatch to deal with the environment. That way, when you move to a different environment, you don't have to make changes to the Profiler. | ||
==== Connections ==== | ==== Connections ==== | ||
| − | |||
Connect the Profiler Main Output to the ToneMatch mixer (since the ToneMatch mixer is the input to the FOH (Front of House)). | Connect the Profiler Main Output to the ToneMatch mixer (since the ToneMatch mixer is the input to the FOH (Front of House)). | ||
| − | + | {{#lst:Kemper Profiler|MainOutConnections}} | |
| + | <!-- | ||
* Connect to a 1/4 (6.3) input. Use a 1/4 (6.3 mm) Tip-Sleeve cable. | * Connect to a 1/4 (6.3) input. Use a 1/4 (6.3 mm) Tip-Sleeve cable. | ||
* XLR connection. That is preferable when you have cable runs in excess of 20 feet (six meters). | * XLR connection. That is preferable when you have cable runs in excess of 20 feet (six meters). | ||
| Line 12: | Line 12: | ||
Source: Kemper Main Manual | Source: Kemper Main Manual | ||
<section end=MainOutConnections /> | <section end=MainOutConnections /> | ||
| − | + | --> | |
==== Settings ==== | ==== Settings ==== | ||
In the Profile Output section, page 1, Set Main Output to Master Mono (or Master Stereo if you are running two L1 systems). | In the Profile Output section, page 1, Set Main Output to Master Mono (or Master Stereo if you are running two L1 systems). | ||
| Line 37: | Line 37: | ||
===== Connections ===== | ===== Connections ===== | ||
| − | {{#lst:Kemper Profiler | + | {{#lst:Kemper Profiler|MainOutConnections}} |
==== L1 Model 1S/L1 Model II ==== | ==== L1 Model 1S/L1 Model II ==== | ||
Revision as of 18:21, 14 June 2021
Contents
ToneMatch Mixer
Set everything flat on the ToneMatch mixer and control the guitar sound on the Profiler. If necessary, use the zEQ or ParaEQ to solve acoustic issues at the venue. That is: Use the Profiler to create your guitar sound. If necessary, use the zEQ and ParaEQ on the ToneMatch to deal with the environment. That way, when you move to a different environment, you don't have to make changes to the Profiler.
Connections
Connect the Profiler Main Output to the ToneMatch mixer (since the ToneMatch mixer is the input to the FOH (Front of House)).
Settings
In the Profile Output section, page 1, Set Main Output to Master Mono (or Master Stereo if you are running two L1 systems).
On the ToneMatch mixer, on the channel to which you have attached the Profiler
- ToneMatch Preset
- Category: Electric Guitars
- Preset: Flat E. Guitar ZEQ or General Processor [try both]
- ZEQ
- Lo, Mid, Hi set to 0 (I use this for quick changes to compensate for room acoustics)
- ParaEQ
- All bypassed
- Comp/Gate
- Bypassed
- Mod
- Bypassed
- Delay
- Bypassed
- Reverb
- Bypassed
No Mixer
If you are not using a mixer between the Profiler and the Bose system, this section is for you.
L1 Pro
You can connect the Profile Main Output to the L1 Pro Input 3.
Connections
L1 Model 1S/L1 Model II
Connect the Profiler Main Output to the Analog Input on the Power Stand. Set the Analog Input Trim so you get a solid green light. If you see solid red, turn down the Trim
L1 Compact
Connect the Profiler Main Output to Channel 2. Set the ToneMatch switch to Line Level (Down).
S1 Pro
Connect the Profiler Main Output to Channel 1 or 2.
Connections
Another option is to connect the Profiler headphone output to the S1 Pro Input 3 (the 1/8 inch (3mm) input). Input 3 is stereo.
F1 Model 812
Connect the Profiler Main Output to Channel 1 or 2.