Difference between revisions of "HeadRush Prime to L1 Pro"
m |
m |
||
| Line 7: | Line 7: | ||
[[File:HeadRush Prime to L1 Pro.jpg]] | [[File:HeadRush Prime to L1 Pro.jpg]] | ||
| + | * On the HeadRush Prime, you can leave the 1/4 output at the default Line Level Output.<br>You'll find that under Global | Audio Tab | 1/4" Level. | ||
| + | |||
| + | ;L1 Pro Inputs | ||
| + | |||
| + | [[File:L1 Pro Line Level Inputs.jpg]] | ||
| − | |||
References: | References: | ||
Revision as of 01:53, 2 November 2023
Q: How do I connect a HeadRush Prime pedalboard to an L1 Pro
A:
- HeadRush L (mono) 1/4 inch (6.3 mm) Tip-Ring-Sleeve output to L1 Pro channel 3 (1/4 inch (6.3 mm) Tip-Ring-Sleeve).
- Don't use the HeadRush XLR outputs to the L1 Pro XLR inputs. The HeadRush XLR Outputs are line-level and too hot for the L1 Pro XLR inputs (which are designed for microphone-level signal sources.
- On the HeadRush Prime, you can leave the 1/4 output at the default Line Level Output.
You'll find that under Global | Audio Tab | 1/4" Level.
- L1 Pro Inputs
References: