PS1 Powerstand Connections/Line Out/XLR

XLR Line Outs Channels 1 and 2

• post trim (+4 dBu nominal)

For Channels One or Two you can run an XLR cable to the House or recording console like this. The outputs are post-trim (+4 dBu nominal). Most professional consoles will have a switchable -20 dB pad at the inputs to lower the input level if required.

The XLR Line out is not suitable for connection to another PS1 Power Stand (Classic) / Model I as the output level is too high for a PS1 Power Stand (Classic) / Model I Channel 1 or 2 input. If you want to daisy-chain PS1 Power Stand (Classic) / Model Is a pad is recommended.

Try moving the mouse over the image below. If you have Java installed, you will see notes related to what you touch with the mouse.

---